Welcome, Guest. Please login or register.

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
Amiga/MorphOS/AROS Programmers Forum / Re: ALS, a new graphics system - RELEASED!
« Last post by saimo on May 29, 2023, 04:37:39 PM »
Amiga OS / AmigaOS 3.2 problems
« Last post by PunkTiger on May 29, 2023, 03:30:21 PM »
Seems to be a bit of a ghost town here, but I'll give it a whirl...

I had recently upgraded my A1200 to use AmigaOS 3.2 (ROMs and software). The update wasn't without its issues, as the software came on a CD, and my A1200 doesn't have a CD reader, and I haven't put a Gotek on it yet. I got the ROMs in the right sockets on the 2nd try, the ADFs of the software unpacked to discs, and I went for the installation. It went smoothly until I got to the Storage disc which cropped up with a error, and caused the whole installation to halt. I managed to get the Storage disc repaired, and started the installation again. This time it went through seemingly without a hitch. But, that's when the trouble started.

Long story made not as long, my A1200 now refuses to see the PCMCIA card slot (PrepCard says there's no slot). That was the only way I could get outside programs on my Amiga, and vice versa. Checking with the drivers and Storage, CF0 is up and mounted, but it's not reporting when a card is inserted.

Also, I have a boot conflict. It seems that I now have a DH0 and a DH1, and a DH0.1 and a DH1.1. I need to go to the boot menu when the computer starts (hold down mouse buttons), and disable either the ".1" drives, or the regular drives. Both sets of drives point to the exact same place, respectively.

So, you can see my quandary. Short of nuking everything on the drive and starting from scratch, are there any pointers someone can give me to permanently disable/remove the ".1" drives, and/or what I should look for to have my PCMCIA card slot active again?

Any help will be greatly appreciated!
Yeap, you can promote most of the screens if they're not using the custom chips.
I used NewMode all the time.
     The Pacific Commodore Expo NW exhibits continue to change, and the number of them is expanding!  See


          Robert Bernardo
          organizer - Pacific Commodore Expo NW 2023
Amiga Marketplace / Floppy Disks - South East, UK
« Last post by sir_inferno on May 27, 2023, 02:43:27 PM »

I have about 300 Amiga disks, made up of magazine cover disks, blank disks, etc.

I don't really have room for them anymore and would prefer them to go to a good home.

Available for collection from the South East of the UK, or I'll send them to anyone who pays for postage.

Thanks all
Amiga Magazines / LOAD 3 available as a german print magazine
« Last post by AndreasM on May 27, 2023, 02:01:08 PM »
Issue 3 of LOAD was originally published by VzEkC e.V. only as a german PDF magazine.

This issue is now also available as a german print magazine and can now be ordered from our online shop.

The sales price goes almost entirely to the VzEkC e.V.

Issues 5 to 8 are also available in our online shop.

Amiga Hardware Issues and discussion / Re: CD32 video problem
« Last post by Egogamerx on May 26, 2023, 03:43:40 PM »
I don't have another TV with composite input.

But this TV works fine with other consoles using the same cable, so it's not a TV or cable issue.
New User Introductions / Re: New Profile
« Last post by Marco074 on May 26, 2023, 02:39:14 PM »
Hello Ciao :)
Amiga Hardware Issues and discussion / Re: CD32 video problem
« Last post by SeiyaBe on May 26, 2023, 11:21:05 AM »
you should try to connect CD32 to an other TV or monitor to see if there is the same problem
I want to run native Amiga software on my A1200 and build my own ShapeShifter. I will
look for a Quadra rom.

in the issue 100 i written a shapeshifter tutorial
Pages: 1 2 [3] 4 5 ... 10