Welcome, Guest. Please login or register.

Recent Posts

Pages: [1] 2 3 ... 10
1
Amiga Hardware Issues and discussion / Re: CD32 internal fan?
« Last post by kolla on July 10, 2025, 05:25:52 PM »
@FOLLETT

Why what? This isn’t SX32, this is SX32 Pro, 50MHz 68030 (and optionally 68882), I got one too and it does get warm, especially with spinning disk installed.
2
A600GS & A1200NG / Re: A1200NG NOW with CPU Boost upgrade Kit running WB & Games
« Last post by F0LLETT on July 10, 2025, 04:09:29 PM »
Oh, nice. So the passive heatsink and this grill will suffice if CPU boost comes ;)

Thank you

I had a standard sealed box, everyone gets. Just the heatsink and it runs just fine for hours on end.
I used to leave it running for over 6 hours overclocked running some intensive games / demos.
3
Amiga Hardware Issues and discussion / Re: CD32 internal fan?
« Last post by F0LLETT on July 10, 2025, 04:06:24 PM »
I have to ask why?

Seems pointless to me. There is no way it would generate enough heat to cause any issues.
I ran my ACA1220 clocked at 50MHz for 8 years, 8 hours a day. I also had stock trapdoor cover.
It was never unstable or crashed once. Unless its running at 60 -70 degs, I don't see point.

SX32, would also not throttle CPU. Its set to one speed and runs at that speed all the time.
So the heat generated will not change that much. Where as the ACA1220 could throttle cpu using a governor.
I never saw any point and just ran it as full speed all the time.
4
Amiga Hardware Issues and discussion / Re: CD32 internal fan?
« Last post by BozzerBigD on July 10, 2025, 12:32:53 PM »
I know this is an old thread but I wanted to be on record as saying it is possible to mount a 40x40x10mm fan inside the CD32/SX32. It was positioned between the hard drive (spinning) and memory simm. It is very tight so is held in place by friction and sits on top of an FPGA of some sort so it's in line with the grill! A fan guard with sections of the sides cut out was glued to the bottom of the fan to promote air flow sideways from the CPU/FPU and then blown out of the top grill!  Power came from a molex adapter from a spare CD32 psu I had. It keeps it stable unless it is throttled for an extended period of time playing something like Reshoot Proxima III!

I would recommend a IDE2CF card solution to reduce the heat further.

The fan was this model: Noctua NF-A4x10 FLX
5
A600GS & A1200NG / Re: A1200NG NOW with CPU Boost upgrade Kit running WB & Games
« Last post by E5150 on July 10, 2025, 11:49:29 AM »
Possible. However fan is not needed, it never goes over 50 deg even when overclock set on all the time.

Oh, nice. So the passive heatsink and this grill will suffice if CPU boost comes ;)

Thank you
6
A600GS & A1200NG / Re: A1200NG NOW with CPU Boost upgrade Kit running WB & Games
« Last post by F0LLETT on July 10, 2025, 09:05:49 AM »
Possible. However fan is not needed, it never goes over 50 deg even when overclock set on all the time.
7
A600GS & A1200NG / Re: A1200NG NOW with CPU Boost upgrade Kit running WB & Games
« Last post by E5150 on July 10, 2025, 02:47:46 AM »
Already being discussed. My GS was the test for overclocking.

Is it possible to plug in a 5V small 2pin (20x20mm) or a small blower fan somewhere on a board inside the A600GS? I have couple of them and I've made a custom rear grill for testing so the hot air can go out. Thanx
8
General chat about Amiga topics / Re: Pictures and video from PaCommEx 2025
« Last post by RobertB on July 10, 2025, 01:26:05 AM »
     Pacific Commodore Expo NW video-uploading has resumed!  The latest videos are

Jones, C64OS, and TeensyROM - PaCommEx 2025

https://youtu.be/krB2r2TeFdA

Bernardo and AmigaOS 4 demos, part 2 - PaCommEx 2025

https://youtu.be/YqPtgxJP6OU

         Truly,
         Robert Bernardo
         organizer - Pacific Commodore Expo NW
         http://www.portcommodore.com/pacommex
9
Amiga Marketplace / WTB: Dino Wars (Magic Bytes)
« Last post by Archminion on July 09, 2025, 09:42:46 PM »
Looking for a complete copy of this game.
Preferably in very good condition but anything would be considered.

Thanks
10
A600GS & A1200NG / Re: AmiBench help and suggestions
« Last post by NickLM71 on July 09, 2025, 07:35:09 AM »
Brilliant, thanks for that, it works :)
Pages: [1] 2 3 ... 10