Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

Recent Posts

Pages: [1] 2 3 ... 10
1
Amiga Desktop Audio and Video / Re: Best tracker MODS ever
« Last post by spacedrone808 on May 07, 2021, 07:30:42 AM »
I was permanently banned on all ugly g platforms.
So there is no yt channel and tracker base anymore.
Countless hours or work were sent to trash bin.
This is what is happening when you are messing with monopolistic corporations.
Don't trust your information to them.

Ultimately, here is the download link to the best mods ever created by mankind:
https://mega.nz/file/fgpmGLKK#BX5w0ErIibKDGi1x2_Wg4v8CcftWrE27_kSo5S4Wvxw

~700Mb of compressed joy.
Also there is a mirror on my personal web-page.

Hope that someone will appreciate this collection.
2
Tonight I replaced the old 40x20mm fan with a 40x10 Noctua fan and partially reinstalled the case.  Quiet and cool. 
3
Amiga Hardware Issues and discussion / Re: Amiga 600 CPU
« Last post by trekiej on May 07, 2021, 02:31:01 AM »
Thanks, I have seen it.
4
Imaginative combination of elven magic and a hot plate.
Seem there's always pet hair involved in all of my projects too.  :P

Plaz
5
It cost GVP a lot to setup the injection moulding for those cases.

I understand they had about 4 million in investor funding. Quite an advantage at the time

Anyway, nice job. I'd have gone for about 110 myself. Just to make sure. :)

EDIT: And because my work area is chilly.
6
My A530 case was bowed from years of use and heat from the components inside.  I have seen many other GVP cases online with the same problems.

I flattened the case by laying it upside down on the bed of my 3D printer.  I then placed some weight on the inside of the case and started warming the bed.  I slowly brought the bed up to 100C and left it there for about a half hour.  At that point I slowly cooled the bed for another half hour.  I didn't take a before picture but the after shot is attached.

A couple of notes.  Make sure the bed is clean.  Like really clean.  I somehow got a small dog hair pressed into the case.  Be careful with the heat and time.  I think I pushed it about as far as I could.  There are a couple of small shiny areas where the texture is gone. 

8
Amiga Hardware Issues and discussion / Re: Amiga 600 CPU
« Last post by trekiej on May 06, 2021, 05:57:11 AM »
Amiga A600 plus Raspberry Pi = Graffiti Box?
9
Amiga Marketplace / WANTED: Dead Amiga 3000 Power Supplies
« Last post by madmungo on May 06, 2021, 04:16:11 AM »
Hey all,

Am DEAD Amiga 3000 Power Supplies. Don't need the cage just the circuit boards.

Thanks,
MadMungo
10
Friendly reminder to my listeners & audience

Hi Dudes,

In my current online voting, I wanna ask you the following question(s) to vote for:

"Which tracks from Psyria's previous music albums would you like to hear again as a reloaded version(s)?"

You would like to take part in the voting, but you don't have the "sound" of the former titles in your ears anymore?
No problem! :)

Below is a "refresher" for your ears of all the previous titles that are available for selection! :)
(As limited time download)

The Last Obligation [EP]
01_Psyria_-_The_Last_Obligation
02_Psyria_-_The_Flying_Bird
03_Psyria_-_Mouth_Of_The_South
04_Psyria_-_Everyone
05_Psyria_-_Fly_Like_The_Wind
06_Psyria_-_The_Saviour

The 2. Chapter [LP]
01_Psyria_-_Around_The_Clock
02_Psyria_-_Be_A_Part_Of_Me
03_Psyria_-_Chilling_Mellow
04_Psyria_-_Here_We_Go
05_Psyria_-_High_Voltage
06_Psyria_-_Into_The_Future
07_Psyria_-_Light_My_Fire
08_Psyria_-_Make_It_Hot
09_Psyria_-_Mental_Atmosphere
10_Psyria_-_Overflow
11_Psyria_-_Ride_To_The_Sky
12_Psyria_-_Rock_To_The_Groove
13_Psyria_-_Take_The_Power
14_Psyria_-_You_So_Good_To_Me

Moving On [EP]
Moving On # Complete Trackplaylist @ Youtube

Voting ends on 19.05.2021.

Voting-Link:
The Stage Is Yours!


And always remember ...:
Without YOU - There Would Be No ME

Thank you!  :)



AMiGA 4 EVER
Pages: [1] 2 3 ... 10