Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Workbench won't display non-iconed files  (Read 2302 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mgericsTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 294
    • Show only replies by mgerics
Workbench won't display non-iconed files
« on: June 25, 2004, 11:53:12 AM »
Hmm. Have OS 3.9, decent WarpEngine, Cybergraphics on a CV64. When I have files in ram: (or any other device) and I open the device via Workbench, no matter what I select, View All, By Name, By Icon, etc, if the files do not have an icon and are not directories, they are not displayed in the window. E.g., when Ram;: is opened and I choose Show All, I see icons for ENV: T:, etc but no file icons.

I took everything out of user-startup and WBStartup, checked startup-sequence for non standard thingys, to no avail. Ideas? I haven't mucked around with Cybergraphics yet, so that may be the way to go. It took me a lot of frustration to get CG working properly (get the right version and RTFM, dork!) so I haven't tried anything...

Thanks to all you helpful guys out there.
Logged
 

Offline Thomas

Re: Workbench won't display non-iconed files
« Reply #1 on: June 25, 2004, 01:04:48 PM »

Default icons are taken from envarc:sys/def_xyz.info, where xyz is the file type defined in DefIcons prefs. Without DefIcons running only Disk, Tool and Drawer count.

Check that these files are real icons (load them into IconEdit). Also check that these icons have the correct type (disk for def_disk.info, drawer for def_drawer.info and tool or project for all others). There are also some called def_.info where is DF0 or PC0 or RAM or so, these have to be of type disk.

Bye,
Thomas
Logged
 

Offline MAD

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 962
  • Country: 00
    • Show only replies by MAD
Re: Workbench won't display non-iconed files
« Reply #2 on: June 25, 2004, 01:40:38 PM »
Hoya!

If you use NewIcons, have you set it up properly?

Besides, I think there can be problems if you use it with a GFX card.

Be funky

M A D
Logged
:afro: AMIGA :afro:
- The Computer With A Soul-
 

Offline mgericsTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 294
    • Show only replies by mgerics
Re: Workbench won't display non-iconed files
« Reply #3 on: June 25, 2004, 03:02:49 PM »
I'll check those things out, but even without deficons, Show By Name should display something, shouldn't it ??!?? Always did before....
Logged
 

Offline HotRod

  • Sr. Member
  • ****
  • Join Date: Mar 2002
  • Posts: 370
    • Show only replies by HotRod
Re: Workbench won't display non-iconed files
« Reply #4 on: June 25, 2004, 03:08:51 PM »
There are an option called "View by name" but that doesn't show files with no icons, it only lists them.

You shall choose "Show" and in the undermenu you choose "All files". It defaults to "Only icons".
Logged
 

Offline Vincent

  • Hero Member
  • *****
  • Join Date: Dec 2002
  • Posts: 3895
    • Show only replies by Vincent
Re: Workbench won't display non-iconed files
« Reply #5 on: June 25, 2004, 03:34:05 PM »
Quote

Thomas wrote:

Default icons are taken from envarc:sys/def_xyz.info, where xyz is the file type defined in DefIcons prefs. Without DefIcons running only Disk, Tool and Drawer count.

But, without those files being there, WB should show them as white icons with a folded corner.
Logged
Xbox360
"Oh no. Everytime you turn up something monumental and terrible happens.
I don\'t think I have the stomach for it." - Raziel
 

Offline mpiva

  • Sr. Member
  • ****
  • Join Date: Aug 2003
  • Posts: 297
    • Show only replies by mpiva
    • http://members.shaw.ca/michpiva
Re: Workbench won't display non-iconed files
« Reply #6 on: June 25, 2004, 04:44:08 PM »
@ HotRod

   Why is it that some people don't seem to actually READ the message before replying?

@ mgerics

   Before wasting a lot of time fiddling with the CGX settings, test to see if it's a CGX problem in the first place.  It's easy enough to move your CGX monitor file into Storage and boot into Workbench using a native screenmode.  If the files still don't appear when you select "Show-->All Files" then its NOT CGX.  But if they do show up, then you know it IS CGX and THEN you can start the arduous process of fiddling with all the CGX settings.

   Hope this helps.
Logged
-- Michael A. Piva --


"In engineering, there is no single truth, no one right answer; there\'s a canvas, and you paint it your way, only with chips or gates or subroutines rather than actual paint. That\'s the Amiga..."
-Dave Haynie
 

Offline mgericsTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2002
  • Posts: 294
    • Show only replies by mgerics
Re: Workbench won't display non-iconed files
« Reply #7 on: July 06, 2004, 03:27:49 PM »
Got it! I had Elena's Powericons running in startup-sequence. I was sure this wasn't happening before, but oh well...thx for the comments, folks.
Logged
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show only replies by Framiga
Re: Workbench won't display non-iconed files
« Reply #8 on: July 06, 2004, 05:04:45 PM »
Hi

Install the latest PI 1.06 that shows a frame on 8 bit screens. (and others upgrades/fix) and a NEGATIVE effect for selected icons.

Ciao

Logged
 

Offline elendil

  • Sr. Member
  • ****
  • Join Date: Nov 2002
  • Posts: 324
    • Show only replies by elendil
    • http://www.idiot.fnuck.dk
Re: Workbench won't display non-iconed files
« Reply #9 on: July 06, 2004, 05:32:07 PM »
Quote

mgerics wrote:

I took everything out of user-startup and WBStartup, checked startup-sequence for non standard thingys, to no avail.

Got it! I had Elena's Powericons running in startup-sequence. I was sure this wasn't happening before, but oh well...thx for the comments, folks.


You need glasses, mister :)

Sincerely,

-Kenneth Straarup.
Logged
 
Pages: [1]   Go Up
« previous next »