Cyberstorm MK II manual?

[Dragster]

Hi!!

Just wondering if anyone could point me to a place where I can download a pdf copy of the phase CS MK II 68060 board user's guide. I have one of those boards but the A4000 won't boot with it (although I saw the board working a few days ago), I don't know what happened. I was thinking maybe I have to do something to make it work , jumpers, etc.. that's why I'm asking for the user's manual/guide.


thanks in advance!!!

Dragster

[aardvark]

Here is DCE's download page, you may find something useful here.
dcecom.de/downloads

[Castellen]

There is some information and a link to the jumper descriptions here:
http://www.amiga-hardware.com/cybermkii.html

You need to set both the clock source jumpers on the computer motherboard to the correct position or the card will not run.  I'm pretty sure they need to be set to EXT (external clock).

Check the 200 pin connector is firmly seated all the way along, and one end is not sticking up.

[Dragster]

You need to set both the clock source jumpers on the computer motherboard to the correct position or the card will not run.  I'm pretty sure they need to be set to EXT (external clock).



This did the trick! Thanks!!

Dragster

[adolescent]

If you still need a copy I can scan mine this weekend.

[TjLaZer]

I would be interested in a nice PDF.  If you want I can build one if someone wants to email me the scanned images.  Must be good quality though.

[Abou27]

Hi

Just bought a CBMKII 060 on eBay and have been searching everywhere for info or a manual and I stumbled upon this thread!  Curious about whether the pdf idea happened in the end?

[x56h34]

What's funny about this thread is that the jumper positions should be set to INT and not EXT, however Dragster reported that it worked for him...

As far as Phase 5/DCE accelerator cards for A4000 go:

INT should only apply for CSMK-II

EXT should apply to CSMK-III and CSPPC

[X-ray]

@ all

I have scans of the MK-II manual and the CyberSCSI Module manual. PM me your email adress if you want them.    

[nex4060]

It's the MKI that need the INT and the MKII/III/PPC needs the EXT

[x56h34]

@nex4060:

I forgot about the CSMK-I, the ancient one. :-)

Anyways, as far as the CS-MKII, CS-MKIII, and CSPPC cards go, my information is 100% correct.

CS-MKII definitely needs the clock jumpers set to INT in order to work.

[X-ray]

x56 is right.

I have the MKII and a PPC, and they use different clock jumpers (I actually made the mistake of using a PPC on jumpers set for MKII and I had  problems).

[Framiga]

@x56h34

confirmed . . .just tested a CSMKII on my system in INT CLOCK mode.

On an friend A4000CR mobo, the CSMKII doesn't works (seems for the lacks of the 50 Mhz quartz on the mobo).