Welcome, Guest. Please login or register.

Author Topic: Workbench stopped booting  (Read 220 times)

Description:

0 Members and 5 Guests are viewing this topic.

Offline sepulchreTopic starter

  • Newbie
  • *
  • Join Date: Oct 2026
  • Posts: 5
  • Gender: Male
    • Show only replies by sepulchre
Workbench stopped booting
« on: November 17, 2026, 11:01:01 PM »
Hello,
My A500 was working great except for the sound; it wouldn't play all the notes that went to it. On some good advice I pulled the Paula ic and sprayed the socket with contact cleaner - Deoxit 5. Put it back together and it worked fine.
Since then I have tried a couple of my old games - Gold of the Realm and some others and it seemed it load okay. But when the game was supposed to actually begin after the initial choices, it got an error like Cannot Initialize memory, or something similar. I thought it could be a software error, the disk was, after all, 35 years old.
But now I just got a new, well, NOS, program - Dr T's KCS midi sequencer package. It acted like it was loading but then just stopped. After several tries I decided that maybe some other ic sockets were having problems. So I took out all the socketed chips, one at a time, sprayed the sockets and reinserted them. What could it hurt, right?
Well, now my poor A500 doesn't recognize the Workbench disk.... or the test disk... or the original Workbench disk, or anything at all. And I'm thinking, "My God! What have I done?!" I checked the drive, which I cleaned and lubed a week ago - it seems fine.
So, does anyone have a clue as to what may be going on? Is there something I can check? I am an electronics tech but I'm not used to working on computers, at least not Amigas. I did repair my old C64 and its disk drive.
Any ideas?
Ken
 

Offline sepulchreTopic starter

  • Newbie
  • *
  • Join Date: Oct 2026
  • Posts: 5
  • Gender: Male
    • Show only replies by sepulchre
Re: Workbench stopped booting
« Reply #1 on: November 18, 2026, 03:11:43 AM »
Okay, how about this: which chips are involved in the reading of disks, especially at boot time?
Anybody know?
 

Offline F0LLETT

  • Amigakit / A-EON Support / PSPUAE DEV
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1304
  • Country: gb
  • Thanked: 124 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: Workbench stopped booting
« Reply #2 on: November 18, 2026, 09:06:02 AM »
Okay, how about this: which chips are involved in the reading of disks, especially at boot time?
Anybody know?

All chips are involved at boot time. Paula and CIA B deal with floppy drive, if I recall.
Did you reseat all chips?

Also check floppy cable is in all the way.
« Last Edit: November 18, 2026, 09:06:50 AM by F0LLETT »
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline Thomas

Re: Workbench stopped booting
« Reply #3 on: November 18, 2026, 01:47:14 PM »

Those ancient IDE harddrives usually only support CHS addressing while modern USB adapters insist on LBA addressing and don't support CHS any more. Because of this Windows and thus WinUAE cannot properly access them via USB. But I believe Toni has added certain workarounds to WinUAE to bypass this limitation. Maybe you find something in old change logs. Or go to eab.abime.net and ask for support directly from the specialist.


Offline AmigaPete

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 260
  • Country: ca
    • Show only replies by AmigaPete
Re: Workbench stopped booting
« Reply #4 on: November 18, 2026, 03:41:36 PM »
I think you replied to the wrong thread. OP has a standard A500 with floppy drive.

For the OP, check that you did not damage any chips when you pulled and cleaned them. Did you use an actual chip pulling tool or a flat blade screwdriver? What can also happen even when using a proper tool is that some of the legs can get deformed - check for misalignment of the legs even with the chips in their sockets.
 

Offline F0LLETT

  • Amigakit / A-EON Support / PSPUAE DEV
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 1304
  • Country: gb
  • Thanked: 124 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: Workbench stopped booting
« Reply #5 on: November 18, 2026, 04:20:17 PM »
I think you replied to the wrong thread. OP has a standard A500 with floppy drive.

For the OP, check that you did not damage any chips when you pulled and cleaned them. Did you use an actual chip pulling tool or a flat blade screwdriver? What can also happen even when using a proper tool is that some of the legs can get deformed - check for misalignment of the legs even with the chips in their sockets.

Guessing Thomas was replying to his other problem in previous thread, about his HDD issues.
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline Thomas

Re: Workbench stopped booting
« Reply #6 on: November 18, 2026, 04:49:02 PM »
I think you replied to the wrong thread.

Indeed.