Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store

AuthorTopic: rapid road usb clockport version  (Read 106 times)

0 Members and 1 Guest are viewing this topic.

Offline bomrat

rapid road usb clockport version
« on: March 30, 2018, 06:53:44 PM »
hi, i am thinking of getting the rapid road for my a1200
i have the aca1233n accelerator and rtc addon.
if i connect the rapidroad to the accellerator. can i plug the rtc to the onboard clockport.. or can / need a clockport splitter...

thanks
 

Offline Oldsmobile_Mike

Re: rapid road usb clockport version
« Reply #1 on: March 30, 2018, 08:26:22 PM »
Depends on your version of A1200 motherboard.  Some of them don't have the pins in the correct places (would require desoldering or adding new pins), AFAIR.  Most likely you'd be fine though.  ;)

See last section on this page:  http://www.ianstedman.co.uk/Amiga/amiga_h_w/clock_port/clock_port.html
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline Toddles

Re: rapid road usb clockport version
« Reply #2 on: April 02, 2018, 12:21:32 AM »
Sorry to hijack the thread but has anyone else had issues with these? I 've bricked two of them, connected directly to the clockport and worked flawlessly for about 3 months just with usb memory sticks then the next day dead with no red led on the board. nothing against IC as the Indivision AGA is great.