IBrowseNetwork Program failed (error #8000000B)???

[kreciu]

Hi. I finally get my network card to work with EasyNet (manual set up) and my router (ping works fine etc.). I installed Ibrowse 2.4 demo and I'm getting this:

IBrowseNetwork
Program failed (error #8000000B).
Wait for disk activity to finish.

??

Can someone help me? I found similar post but not answer to this problem.

BTW. If I'm lucky and my Amiga will not hangup I can actually load some website...

[giZmo350]

Some suggestions per Toni Wilen: AmiBay.....

Usual reasons for 8000000B (Line-F trap):

- Max transfer too high
- Library or program that requires FPU (and using setup without FPU)
- Missing/wrong 68040/060 library if you have 68040+.  (Not You)
- Old version of SetPatch

BTW, you can use the full version of IBrowse - Google is your friend for key.

[kreciu]

Some suggestions per Toni Wilen: AmiBay.....

Usual reasons for 8000000B (Line-F trap):

- Max transfer too high
- Library or program that requires FPU (and using setup without FPU)
- Missing/wrong 68040/060 library if you have 68040+.  (Not You)
- Old version of SetPatch

BTW, you can use the full version of IBrowse - Google is your friend for key.

This issue happen only with IBrowse. Every other software works fine. So, I don't think it is Max transfer, and I changed it and the same error is still there.

When you say "old SetPatch"... what is new one?

[Thomas]

When you say "old SetPatch"... what is new one?

http://aminet.net/package/util/boot/SetPatch_43.6b

[Oldsmobile_Mike]

http://aminet.net/package/util/boot/SetPatch_43.6b

His sig says he's using 3.9.  He may already have a newer one than that...

[kreciu]

His sig says he's using 3.9.  He may already have a newer one than that...

Just to be sure. I'm running OS3.9 BB1,2,3 and 4 and I have this problem. I just installed old Aweb and it downloads "websites" (or what ever is left from it ).

Ibrowse is the only program with this error . I'm going to try 2.3.

BTW. It is interesting that I have access to internet but my router doesn't see my Amiga connected.

[vince_6]

Make a virus scan with virus Z.
Also this happens if tcp/ip is not running but this is not your case.

[kreciu]

No viruses, Ibrowse will not load basically any website (with exception of sasg.com).

Literary everything else works great (like I mean great!).

The same error ALL the time.

[vince_6]

Run snoopdos and check where it stops.

[kreciu]

Run snoopdos and check where it stops.

So, first time I tried it showed me error during loading javascript.library, so I turned off javascript in Ibrowse and... program hung up on me little later. (There is ton of fonts missing, but this should not be an issue).

Ibrowse works fine, I can do "anything", problem start when I start loading websites. See picture bellow.

Good think Aweb is working, so at least I can get to Aminet .

[kolla]

Either install FPU or install correct version of IBrowse. It really sounds like you have somehow installed the Javascript and/or some image code plugin that require either FPU (68882/68881) or 68040/060.

I just checked, sasg.com seems to only use GIF files for images, which is probably why it doesn't crash there.

[Oldsmobile_Mike]

Any problems with Multiview?  Installed the latest versions of datatypes?  IMHO these are the best:  http://www.warpdt.co.uk/

[kolla]

By default, IBrowse uses its own image decoders. Of course, a way to test wether they are the ones causing trouble, is to configure IBrowse to use datatypes instead. Preferences, HTML, Images, "External" instead of "Internal". (for JPEG, which I suspect is the culprit here).

[kreciu]

Either install FPU or install correct version of IBrowse. It really sounds like you have somehow installed the Javascript and/or some image code plugin that require either FPU (68882/68881) or 68040/060.

You are right...! I'm not sure how I did it but I did installed version with fpu. I actually tried that yesterday and most likely I AGAIN installed wrong one. Today I installed 020 version and... it WORKS!

"Me stupid". I think I got rusty...

Thank you for surviving with me. I was afraid there is something wrong with my carefully crafted beer, I mean AmigaOS install.

This is first time I actually see website running on real hardware under AmigaOS3.9. Last time it was when I used dial up... on my 14.4k modem, with Amiga connected to TV.

Thank you again for help!

BTW. Amiga.org looks BAD, but amigaworld.net looks great on Ibrowse 2.4 . I'm thinking about changing forum due to lack of support for old AmigaOS .

[Oldsmobile_Mike]

BTW. Amiga.org looks BAD

There's a proxy for that.  I have it bookmarked on my system,  lmk if you can't find it off-hand and I can fire up my system and get a link for you.