Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: Broken Audio connector Amiga 1000  (Read 209 times)

0 Members and 1 Guest are viewing this topic.

Offline David Wright

Broken Audio connector Amiga 1000
« on: April 03, 2018, 02:43:30 PM »
Yeah, moved the computer while it was attached to cable and speakers and I done broke something. Pushing down on it brings sound on the connector.

Are these available anywhere? The A500s look different. I did solder to the board from the top side but didn't improve. I do have a video connector on the end of board, looks the same, can I use that?

Offline Oldsmobile_Mike

Re: Broken Audio connector Amiga 1000
« Reply #1 on: April 03, 2018, 02:55:40 PM »
I remember when you could buy a bag of RCA connectors at Radio Shack. Alas! :(  Probably still available on sites like eBay, Amazon, Mouser, etc. Should be an easy solder job to remove and replace. Good luck!
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos

Offline arttu80

Re: Broken Audio connector Amiga 1000
« Reply #2 on: April 03, 2018, 07:13:58 PM »
Yea, maybe you can "borrow" that video connector or use something like this?


I would prefer to install new piece, so you don't have to solder and desolder multiple times and increase potential of damaging something. Good luck anyway!