Problem with Prism2v2, Orinoco gold or PCMCIA

[Krisse]

Does your A600 have at least 020, because this is what the Prism2.device driver needs.

No, it's stock 68000 and all I've seen before is that prism needs KS3, not seen anything about 020. But nevertheless, didn't work with my A1200 either and afaik it has 68020.

Guess I'll just get another one.

[mechy]

No, it's stock 68000 and all I've seen before is that prism needs KS3, not seen anything about 020. But nevertheless, didn't work with my A1200 either and afaik it has 68020.

Guess I'll just get another one.

Before you do, you might want to log into your router and make sure it specifically support WPA/TKIP  its usually a setting somewhere in the wireless lan security area.
It must be WPA/TKIP to work with orinoco,not WPA/AES+TKIP.

If that appears ok,you may have a bad card. I suggest getting one from sir_lucas since he has tested everything he has and is a great help if you have trouble.

[kolla]

TKIP _was_ a _temporary_ solution for legacy equipment, it has been deprecated for years and is not supported in a lot of current APs. Solution may be found in using old APs that support it, but I prefer using ethernet/wifi bridges, for example a raspberry pi with a wifi USB stick.

[Krisse]

The card was dead.