well i have update my Workbench to Classic Workbench

[mcbone]

well i have update my Workbench to Classic Workbench now as my computer with ACA 1233/40 Mhz Accelerator with 128MB RAM load up lot faster run faster to next to get it onto internet


I DID HAVE SOME HELP AT LAG 43 today with the update and upgrade

[danbeaver]

Is this a statement or a question?

[Oldsmobile_Mike]

Is this a statement or a question?

Maybe he is dyslexia?

I hate Classic Workbench.  Hate the way it changes stuff around, makes it "un Amiga-ish" to me.  You're better to build and configure your system yourself.  But I get that some people don't have time/energy/knowledge for this, so to each their own.  Good luck!  

[danbeaver]

A proposed "Upgrade" to the original post:

 [FONT="]Well, I have updated my Amiga’s Workbench to “Classic WorkBench”[/FONT]
    [FONT="]As noted in the title of this thread, I have updated my WorkBench to “Classic WorkBench,” and now that my computer is outfitted with an ACA 1233/40 MHz Accelerator plus 128MB RAM, programs appear to load a lot faster and the access to the Internet was improved as well.

Of note, I did receive help from the group at LAG 43 today with both the software update and hardware upgrade. [/FONT]
  [FONT="]__________________
“Perhaps I is dyslexia”

An Apple a day keeps Bill Gates away from funding charity work on prevention and treatment of infectious diseases in Africa.[/FONT]

[Astral]

Is this a statement or a question?

The answer is yes

[Tenacious]

The question in my mind is will Mcbone (the op, a beginner with only 22 posts) ever bother returning to this site after some of these responses?

We aren't trying to run people off, right?  We do want a larger, more diversified community?

[som99]

I am sure he means the next thing to do is getting his A1200 onto the world wide web ^^

[Oldsmobile_Mike]

I am sure he means the next thing to do is getting his A1200 onto the world wide web ^^

I wonder if it's going to be like this gal?  She said she wanted a calendar on her computer.  

[som99]

I wonder if it's going to be like this gal?  She said she wanted a calendar on her computer.  

Haha, as long as she don't say "Could you empty the trashbin on my computer" xD

[Robert17]

We Helped mcbone instal Classic Workbench Full on his A1200 with ACA 1232/40mhz System at Lincs Amiga Group on the 2nd May :-) He wants to try to go online with it soon too.

Personally I think the Classic Workbench packs are brilliant for those who don't have time to setup AmigaOS With all the niceties and handy applications that make life a little easier - myself included

I'm sure at the next meeting we can get a TCP/IP Stack and a web browser installed and go online in glorious AGA

[danbeaver]

Well, may The Lord Bless you.

[Robert17]

Thanks, and the same to you :-)

[mcbone]

We Helped mcbone instal Classic Workbench Full on his A1200 with ACA 1232/40mhz System at Lincs Amiga Group on the 2nd May :-) He wants to try to go online with it soon too.

Personally I think the Classic Workbench packs are brilliant for those who don't have time to setup AmigaOS With all the niceties and handy applications that make life a little easier - myself included

I'm sure at the next meeting we can get a TCP/IP Stack and a web browser installed and go online in glorious AGA

thank you Robert17  it up and run  do not why but it can not find pcmcia card not seen on workbench screen  when i put in in but it find my brother melcard 2 mb sram card

i also need help getting morpos been looking but but no and no web browsr so that could be why   thank you for help on sat  ian mcbone

[som99]

thank you Robert17  it up and run  do not why but it can not find pcmcia card not seen on workbench screen  when i put in in but it find my brother melcard 2 mb sram card

i also need help getting morpos been looking but but no and no web browsr so that could be why   thank you for help on sat  ian mcbone

Be sure the PCMCIA network card is a 16bit card, also going for wifi or wired?

You will need to install MiamiDX (or any prefeered TCP/IP stack), then you need to install the drivers, Prism 2 compatible cards are quite easy to find. Then CardReset and CardPatch.

I can give you the lines needed for startup-sequence to get it rolling

Edit: Are you talking about MorphOS for PPC macs or for Classic Amigas with PPC cards? You need a PPC card to run the classic MorphOS on Amiga. You can shoehorn in AROS on your Amiga but with a 030 that ain't to practical yet xD

[Robert17]

Hi mcbone,

Do you mean you can't see a Compact Flash card on your Workbench when you plug it into the PCMCIA Slot with it's adapter?

Classic Workbench doesn't come with CF0 In Devs:DosDrivers/ In my haste I might have forgotten to copy it on Saturday.

If you search Aminet for cfd.lha - The file you need should be in there.

Robert.