Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A600 Memory

AuthorTopic: FastATA 4000 MK-VI CF/SATA: new BootROM ver. 7.0  (Read 1304 times)

0 Members and 1 Guest are viewing this topic.

Offline DJS

FastATA 4000 MK-VI CF/SATA: new BootROM ver. 7.0
« on: October 30, 2012, 01:19:43 PM »
ELBOX COMPUTER is pleased to announce that the FastATA 4000 MK-VI CF/SATA controllers are now shipped with the new BootROM (ver.7.0). New BootROM was developed in order to ensure full compatibility with AmigaOS 4.1.

About FastATA 4000 MK-VI CF/SATA
With the FastATA 4000 MK-VI CF/SATA controller you can now take advantage of the latest low-cost, high-capacity and fast SATA/ATA/EIDE devices like hard drives, Solid State drives (SSD), Compact Flash cards, DVD drives, CD-RW drives, CD-ROM drives, ZIP drives, etc.

The FastATA 4000 MK-VI CF/SATA is designed to simultaneously use up to four devices: one Compact Flash card, one SATA drive and two to four PATA devices. The number of simultaneously used Compact Flash cards or SATA drives may be increased with additional adapters up to the total number of all connected devices of four.

Features:
• Fast transfer rate of up to 16.6MB/s
• Supports PIO-0, PIO-3, PIO-4 and PIO-5 modes
• Compatible with ATA 33/66/100/133 and SATA devices
• Adds two buffered and terminated ports for 4 devices
• LBA 48 support in the onboard BootROM (support of drives over 128GB)
• Automatically configured devices
• Compatibility with OS3.x and OS4.x
• Boots from any attached HDD, SSD, CompactFlash, ZIP or LS-120


Package contents:
• Fast ATA 4000 MK-VI CF/SATA Zorro III card with SATA and CompactFlash adapters
• Floppy disk with AllegroCDFS, FastATA software pack and User's Manual
• 46-cm 80-wire ATA-66/100/133 cable

 
             
For more info, see:
FastATA 4000 MK-VI CF/SATA page for customers from the European Union,
FastATA 4000 MK-VI CF/SATA page for customers from other countries.
 

Offline mfilos

Re: FastATA 4000 MK-VI CF/SATA: new BootROM ver. 7.0
« Reply #1 on: November 01, 2012, 10:35:31 PM »
Good that Elbox put a picture at last.
Many people thought that the CF/Sata interface was embedded on the FastATA board and not in external adapters.
Visit my Amiga blog here
- A600: Vampire V3, 128MB, A604n, 16GB CF, Indivision ECS, RapidRoad, MAS-Player + Custom Audio Mixer (internal), HxC SD + Slim floppy (internal)
 

Offline Rabbi

Re: FastATA 4000 MK-VI CF/SATA: new BootROM ver. 7.0
« Reply #2 on: November 14, 2012, 11:07:03 PM »
Is there going to be an offer for owners of older FastATA 4000 to buy the new BootROM chip and/or buy the SATA & CF adaptors with the ribbon cable?  

Another dumb question:  What about the FastATA 1200?  Will the BootROM also be upgraded, too?
« Last Edit: November 14, 2012, 11:15:28 PM by Rabbi »
--------------------------------------------------------
In a world without walls and fences, who needs Windows and Gates?
===================================================================
Computer used:     Amiga A1200 (NTSC version) with 128 MB ...