UAE + KS1.3 Doesn't See Hardfile

[Super TWiT]

I made a 512 mb hardfile (since some installers don't work if you have too much free space) and gave it an rdb using hdtoolbox and wb3.1 (and I installed the FastFileSystem file into WB 3.1)  Thus, the fastfilesystem file should be included inside the rdb.  However, KS 1.3 never sees it.  Also, it is included in the Rom directory.  Any ideas?

[x303]

Kick 1.3 didn't had fastfilesystem in ROM yet (v37+), but loads it's off disc (usually it's placed in the L: directory).

[Thomas]

Make sure that both FastFileSystem and the partition have the same identifier of
0x444F5301. Do not use international or directory cache options.

[Super TWiT]

Make sure that both FastFileSystem and the partition have the same identifier of
0x444F5301. Do not use international or directory cache options.

I am not exactly sure what that means.  Is that in the RDB?

[kolla]

And 1.3 kickstart contains scsi.device?

[Thomas]

Use HDToolbox.