Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Jumper Settings for ST34371N 4GB SCSI drive  (Read 2198 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline TrevorDickTopic starter

  • Amiga Enthusiast
  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 243
    • Show only replies by TrevorDick
Jumper Settings for ST34371N 4GB SCSI drive
« on: October 29, 2009, 08:44:44 PM »
I've just picked up a couple of  4GB ST34371N scsi drives for my A3000.  I can set the correct SCSI ID jumper settings but need a help with the J2 jumper settings to make the drives work with the Amiga. Any help greatly appreciated.

Thanks

Trevor
Logged
Supporting all Amiga flavours
 

Offline Bazzaq

  • Sr. Member
  • ****
  • Join Date: Sep 2005
  • Posts: 363
    • Show only replies by Bazzaq
Re: Jumper Settings for ST34371N 4GB SCSI drive
« Reply #1 on: October 29, 2009, 08:55:40 PM »
Logged
--------------
A4000T 060@50/PPC@233/128MB,Prometheus/Voodoo3/Lan,DCE SD/FF,Prelude
 

Offline TrevorDickTopic starter

  • Amiga Enthusiast
  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 243
    • Show only replies by TrevorDick
Re: Jumper Settings for ST34371N 4GB SCSI drive
« Reply #2 on: October 29, 2009, 09:05:08 PM »
Thanks for the reference.  I had just found it myself and (mainly through trial and error) I managed to determine the correct jumpers.  Drives now working fine.

Many thanks anyway.

TrevorD
Logged
Supporting all Amiga flavours
 

Offline pan1k

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 841
    • Show only replies by pan1k
Re: Jumper Settings for ST34371N 4GB SCSI drive
« Reply #3 on: October 05, 2010, 05:05:40 AM »
Anybody else had to deal with the Termination settings on these drives? Or do I just need to leave the jumper j2 block empty?
Logged
A4K: \\\'060, Cyberstorm MKIII Cybervision 64/3D w/ Scandoubler, Buddha Flash XSurf, MP3@64, A4K: \\\'040, Toaster, Y/C, A1200: Apollo \\\'040, A1200 GVP \'030, A1200: Stock, A2000: 68K, Trump SCSI, Supra 8Mb, and Toaster 4K, A2500: \\\'030, GVP SCSI, Supra 8MB x2, Video Toaster, CD32, Minimig, Efika and Hopefully an A4000T soon!
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: Jumper Settings for ST34371N 4GB SCSI drive
« Reply #4 on: October 05, 2010, 09:12:21 PM »
As with all SCSI drives, you need to enable termination for the drive(s) at the end of the bus (cable) and disable it for all others.

You also need at least one device supply termination power to the bus. Usually it doesn't hurt to use several devices, I usually use the terminating drives.
Logged
 
Pages: [1]   Go Up
« previous next »