Indivision AGA 1200 small glitches

[Mr_Byte]

Do you mean there has been some general improvement in image quality, in addition to HighGFX/Multiscan modes being stable when cold?

It may be a placebo effect, but yes i think the image was more blurry before. Maybe its only me

I tried with some before and after pictures:

Before with some glitches:


After:


When i see it like this, i dont see much differnce.

[Karlos]

Can you get  your monitor to display 1024x768 without any upscaling? Depending on the native resolution of the display, you might get a bit of a black border, but it should be sharper.

[Mr_Byte]

Can you get  your monitor to display 1024x768 without any upscaling? Depending on the native resolution of the display, you might get a bit of a black border, but it should be sharper.

hmm it's actually a native 1024x768 monitor. To be exactly, it is a lcd tv with vga input. When i first tried to connect it with the indivision, it had a 1cm black border to the right. So i used the indivision tool to stretch the image. Did i do something wrong?

[Karlos]

No, I guess not. I thought you might have a monitor that has a different native resolution. LCD's aren't known for their ability to scale non-native resolutions well.

[F0LLETT]

hmm it's actually a native 1024x768 monitor. To be exactly, it is a lcd tv with vga input. When i first tried to connect it with the indivision, it had a 1cm black border to the right. So i used the indivision tool to stretch the image. Did i do something wrong?

Use the LCD's auto setting, to try and get rid of the border down the side.
Stretching in the Indivision config, may cause it to not look 100% right.

Karlos is right, all LCD's look crap unless in the native resolution.

[Mr_Byte]

Use the LCD's auto setting, to try and get rid of the border down the side.
Stretching in the Indivision config, may cause it to not look 100% right.

Karlos is right, all LCD's look crap unless in the native resolution.

I tried to use the auto setting on the lcd, but it is not good enough. I must use the indivision tool to get rid of the black border. I dont think this lcd is the best, but im happy with the picture quality.

Im thinking about to move my lcd tv over to my bedrom and get a nice little crt monitor for my miggy. I think this will give me a more amigaish picture in the games.

[F0LLETT]

I tried to use the auto setting on the lcd, but it is not good enough. I must use the indivision tool to get rid of the black border. I dont think this lcd is the best, but im happy with the picture quality.

Im thinking about to move my lcd tv over to my bedrom and get a nice little crt monitor for my miggy. I think this will give me a more amigaish picture in the games.

Aye, it is true, nothing beats a CRT when it comes to using lots of different resolutions.

[Mr_Byte]

Changed my lcd tv with a old lcd monitor. This time the auto-config are working perfectly. Check this tread: http://www.amiga.org/forums/showthread.php?t=49942

I like to take pictures

[kickstart]

Seems clear at least in this photo, lucky you with this lcd monitors, my lcd native resolution is 1280x1024 too high for highfx =(

[NovaCoder]

Seems clear at least in this photo, lucky you with this lcd monitors, my lcd native resolution is 1280x1024 too high for highfx =(

Yep you need HighGFX Extreme


Hopefully it will see the light of day soon!

[Karlos]

Seems clear at least in this photo, lucky you with this lcd monitors, my lcd native resolution is 1280x1024 too high for highfx =(

Does it have a non-scaling option?

[kickstart]

@karlos

Monitor show all resolutions scaled like dithering.

@novacoder

Thats true? 1280x1024 on aga amigas can be cool, but poor chip ram heh.

[NovaCoder]

@karlos
Thats true? 1280x1024 on aga amigas can be cool, but poor chip ram heh.

Yep, don't expect it to be very fast either