A1208 SCSI + RAM (Fang): Memory question

[barney]

This particular Amiga 1200 SCSI card has two slots that accept 2 sticks of the Special GVP ram.  It takes either 1mb or 4mb sticks.  Do I have to have both slots populated with memory or can I just install a single stick or memory and leave the other slot empty?  I ask this because I only have a single stick of 4mb GVP memory and as expensive as it was, I would hate to have to buy another one.  Thanks.

Barney

[rkauer]

Just one stick will work. Put it into the first socket and you are ready to go.

[barney]

Which one is the first slot.  is the one towards the top of the card number one or the one underneath.  Also, is there a particular jumper I have to set?  I tried both slots and It doesn't register in Workbench.  It says "0" for other memory.  It only shows the 2mb of chip ram.

Barney

[MozzerFan]

You can find the jumper settings here: http://amiga.resource.cx/exp/search.pl?product=a1208&company=&amiga=&intf=&mid=&base=dec&pid=

[barney]

Thanks, I finally figured it out.  The jumper settings were not very clear on how to set this.  I poked around and finally got it working.

Barney