Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A600 Memory

AuthorTopic: New Smaller HxC SD Card Floppy Emulator Preorder  (Read 9100 times)

0 Members and 1 Guest are viewing this topic.

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
  • Total likes: 0
Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #15 on: March 12, 2010, 03:32:56 PM »
Quote from: raketa;547309
now as updated description says: Write support not available on Amiga computers!


Doh!  Well that stops me odering then.

Cheers.
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline sbeehre

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #16 on: March 13, 2010, 01:56:46 AM »
just ordered mine! this will be excellent on my A500 :) Im also really hoping write support for Amiga's will be implemented in future firmware updates!
« Last Edit: March 13, 2010, 03:51:07 AM by sbeehre »
 

Offline ipod_sock

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #17 on: March 15, 2010, 12:47:52 AM »
Nice, might bag me one of these babies...
A500 1.3ks_1MB_Rev6
A600 3.1ks_6MB_Rev1.1
A1200 3.1ks_2MB_Rev1.D1
C64C, C64G, Super Famicom, Xbox 360 S and a partridge in a pear tree...
 

Offline Jeff_HxC

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #18 on: August 27, 2010, 12:22:49 PM »
Important update of the SD HxC Floppy Emulator for Amiga users:

-> Write support added for Amiga !

Quote:
22/08/2010: Firmware SD HxCFloppyEmulator v1.3.0.0
- Amiga Write support added :

Note to the Revision B PCB owners :

To activate this new features you need to add a Microchip 23K256 SPI SRAM chip and 4 resistors.
The connection to do is :

23K256 pin 1 -> 220ohms resistor -> PIC18F4620 pin 22
23K256 pin 5 -> 220ohms resistor -> PIC18F4620 pin 27
23K256 pin 6 -> 220ohms resistor -> PIC18F4620 pin 28
23K256 pin 2 -> 220ohms resistor -> PIC18F4620 pin 29
23K256 pin 8 & 7 -> VCC3.3V (this voltage can be found at the capacitor under the sdcard connector or at the output of the regulator)
23K256 pin 4 -> GND
23K256 pin 3 -> Not connected.

(a 100nF capacitor is also recommended at the pin 8 of the 23K256)

After this modification you should see the message "SRAM OK" at power up.


More infos here:

http://hxc2001.free.fr/floppy_drive_emulator/index.html#SDCARDFloppyemulator
 

Offline Jeff_HxC

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #19 on: October 09, 2010, 05:45:12 PM »
Hi,

Finally i managed to port the file selector software to Amiga:




Rev B & C Hardware are supported. You have just to get the lastest firmware update and file selector software on the project website:

http://hxc2001.free.fr/floppy_drive_emulator/index.html#download

:)
 

Offline Jeff_HxC

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #20 on: October 13, 2010, 07:52:47 PM »
Hi,

A small video demo of SD Card HxC Floppy Emulator used with the file selector software:





http://www.youtube.com/watch?v=p1zP6p9SBLw

Project webpage:
http://hxc2001.free.fr/floppy_drive_emulator/

Producer webpage:
http://www.lotharek.pl/
« Last Edit: October 13, 2010, 09:09:23 PM by Jeff_HxC »
 

Offline Jeff_HxC

Re: New Smaller HxC SD Card Floppy Emulator Preorder
« Reply #21 on: November 29, 2010, 10:22:45 AM »