Welcome, Guest. Please login or register.

Author Topic: Appolo 1240 accelerator  (Read 3008 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline KatManDEWTopic starter

  • Sr. Member
  • ****
  • Join Date: Jan 2009
  • Posts: 346
    • Show only replies by KatManDEW
    • http://www.katmandew.com
Re: Appolo 1240 accelerator
« Reply #14 from previous page: February 15, 2009, 08:13:07 PM »
Can last revision of the mc68060's still be obtained?

I still don't see how the accelerator and Indivision are both going to fit inside that little A1200 keyboard  :-o
A1000
A1200 - Indivision. Apollo 1240.
A2000 - GVP 040-16 meg, 2 meg chip, CD-RW, Flicker Fixer, Picasso II, 8 Up, 286 Bridgecard, OS 3.9
A2000HD #2 - 8 meg RAM, Genlock, Tower case
 

Offline KatManDEWTopic starter

  • Sr. Member
  • ****
  • Join Date: Jan 2009
  • Posts: 346
    • Show only replies by KatManDEW
    • http://www.katmandew.com
Re: Appolo 1240 accelerator
« Reply #15 on: February 24, 2009, 02:35:17 AM »
I think I missed an important point about using the Apollo 1240 (and maybe any accelerator?) - ain't no way, no how, I can reassemble the case with the keyboard installed...

That's probably a duh for the seasoned Amigaholic, but it was somewhat of a eye opener for me. I was however wondering how the heck all kinds of hardware add-on's were going fit inside the A1200 case.

It's kind of a moot point at the moment, because my A1200 won't boot with the 1240 installed anyway. It will boot from floppy with the 1240 installed, and it will boot from hard drive with the 1240 installed, if I remove the memory (which was half the reason I wanted/needed and acclerator).

I have several different problems trying to boot with the memory installed, the most common of which is "Can't run C:version".

Two possible problems I can think of are that my stock power supply might not be sufficient, and I only have the 3.0 ROM installed at the moment.

I have a ATX power supply adapter that I can rig up, and I have 3.1 ROM's on the way, but I think I'm hosed without a keyboard :-D

A tower case sure seems like the ticket... I've never been fond of trying to squeeze more than 10 pounds of crap into a 10 pound bag anyway :-D    
A1000
A1200 - Indivision. Apollo 1240.
A2000 - GVP 040-16 meg, 2 meg chip, CD-RW, Flicker Fixer, Picasso II, 8 Up, 286 Bridgecard, OS 3.9
A2000HD #2 - 8 meg RAM, Genlock, Tower case
 

Offline DoogUK

  • Sr. Member
  • ****
  • Join Date: Dec 2007
  • Posts: 344
    • Show only replies by DoogUK
Re: Appolo 1240 accelerator
« Reply #16 on: February 24, 2009, 08:58:15 PM »
I would first look at the power supply not being man enough.

Some apollo's are very tetchy about what ram they use...try swapping it for different 32meg simms which are cheap on ebay.

3.0/3.1 roms will not be the issue here.

Also clean the contacts on the expansion slot with some rubbing alcohol.
a1200T/040@40/64mb/10 gig/CWB
a600/3.5mb/3.25gb
a1200/blizz 040@40/128mb/4gb compact flash/CWB A4000/40
 

Offline hardlink

  • Hero Member
  • *****
  • Join Date: Sep 2006
  • Posts: 586
    • Show only replies by hardlink
Re: Appolo 1240 accelerator
« Reply #17 on: February 24, 2009, 09:08:28 PM »
Quote

spihunter wrote:
I had a Apollo board the was upgraded to an 060 by PG. It was very solid. The upgrade looked very pro.


So if DCE would return my Apollo 040 that he has had for about eight years, I could bump it up to 060? Cool! Actually, I'd be happy to get my 040 back from the bum.