Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

AuthorTopic: A1200 / A600 keyboard ZIF connector  (Read 1400 times)

0 Members and 1 Guest are viewing this topic.

Offline FrenchShark

A1200 / A600 keyboard ZIF connector
« on: October 22, 2008, 04:07:47 AM »
Hello,

I am trying to find a ZIF connector where I can plug an A600 or A1200 keyboard.
I know the A600's is 30-pin and the A1200's is 31-pin.
The pitch seems to be 1.25mm (I have a Micronik Key6620 board and if I put a standard 0.1" IDC connector next to the ZIF connector, I can see that it does not align perfectly, so it should be 1.25mm and not 1.27mm).
Amphenol has the G27 serie that looks very close to what is in the Amiga (http://www.amphenol.co.za/CatPages/FFC.pdf).
Unfortunately, it is 30-pin max, just good for the A600.

Any idea ?

EDIT : I just found the one used by Micronik adapter:
http://www.allproducts.com/ee/joint-1/06-car_connector.html
or on Amiga : :-?
http://www.allproducts.com/ee/joint-1/05-car_connector.html

I found the connector 52045-3145 or 0039532314 from Molex, 31 pins !! :banana: :banana: :banana:

Regards,

Frederic
 

Offline FrenchShark

Re: A1200 / A600 keyboard ZIF connector
« Reply #1 on: October 24, 2008, 02:37:07 AM »
Hello,

The 31-pin connector is impossible to find.
Here are the Molex part number :
0039532314 : 31-pin, right-angle ZIF
0039532315 : 31-pin, straight ZIF
0520443145 : 31-pin, right-angle, non-ZIF
0520453145 : 31-pin, straight, non-ZIF
But, the distributors have only 30 or 32-pin connectors.

Regards,

Frederic
 

Offline aperez

Re: A1200 / A600 keyboard ZIF connector
« Reply #2 on: July 27, 2010, 10:34:05 AM »
As of this writing, Farnell has qty 350 of 39-53-2314 with a minimum quantity of 10 units. Should cost around fifteen GBP + shipping.
 

Offline ajk

Re: A1200 / A600 keyboard ZIF connector
« Reply #3 on: June 21, 2016, 10:33:54 AM »
Hi guys,

old topic I know but I was also on the hunt for these 31-pin connectors for the A1200. As you probably know the clips often break after repeated use, and sometimes the cable just no longer makes good contact. I eventually managed to find some connectors, and bought a decent sized batch.

If anyone wants some (you can obviously just use the clip portion, but I can't sell those separately, since I could not buy them separately) I will sell these for €10 including world wide shipping (if you buy more than two the unit price will come down, please ask).

I don't imagine I'll be getting any more once these are gone.

Please drop a PM if interested!
 

Offline spawnerbr

Re: A1200 / A600 keyboard ZIF connector
« Reply #4 on: December 31, 2016, 06:41:21 AM »
Do you ship to Brazil? Interested.