AsimCDFS question

[barney]

Hi everyone, got another question.  I just installed ASIMCDFS on my A3000.  After bootup, rather than displaying the CDROM icon, it has an icon that says "CD0:NDOS".  I was able so successfully install ASIMCDFS in the past, so this is very bizarre.  Anybody have any idea what might be going on here.  Thanks.

Barney

[Ilwrath]

Maybe an error in your mountlist (or CD0: device info -- whatever you're using to mount the CD0: device from...)?  

Could be looking to the wrong SCSI.device or ID?

At the very least, the data for the mount is a good place to start looking from.  It's mounting SOMETHING, but what?  ;-)

[delshay]

AsimCDFS looks for your device when you install the software.

click on the correct icons/device name when installing.

use **scsidevice** if its a IDE amiga internal.( check jumpers on back of CD rom master or slave ).

[AmigaMance]

 scsi.device for the internal IDE port? Not atapi.device? I can't get scsi.device to work with any CD/DVD drive.

[Matt_H]

It's asim_atapi.device.

[delshay]

on a A1200 it shows up as scsi.device ( if i remember correctly ) for IDE.

not sure of A3000 but it should see your drive when you install the software,but you have to direct the software  in the right direction when installing.

i think the problem may be the link on the back of the CD rom drive.

[barney]

Thaks for the input guys.  The funny thing is that it worked fine when I was using OS2.1, but when I upgraded the softboot and installed OS3.1, it wouldn't work.  ASimCDFS installed correctly, found the drive correctly,and I used id 3 like I always used.  But with OS 3.1 installed this problem suddendly occurred.  I think it may be caused by the new softboot 3.1 I am using.  I am definately going to go ahead and install the 3.1 ROMS.  THanks everybody.

Barney