Would this CF card work with A590 XT interface?

[LoadWB]

8/16-bit 8GB IDE CF card

According to the information in the auction, this card can work in 8-bit mode.  The XT interface on the A590 is (from my understanding) essentially an 8-bit IDE interface.  Would this card work?

I may just buy one to see for myself.  I'd assume a few things:

1) The XT interface would tell the card to work in 8-bit mode
2) The XT interface in concert with the CF/IDE adapter asserts the right signals
3) The XT interface has the latest ROM to support the large size of the card
4) The A590 I have in my possession actually works

[Zac67]

No, XT IDE isn't compatible with 16 bit IDE.

[Chain]

If you want to connect CF card to A590, you will need SCSI2IDE bridge (ie. ACard).

[LoadWB]

Zac67 wrote:
No, XT IDE isn't compatible with 16 bit IDE.

Then it's a good thing that this card supposedly will work in an 8-bit mode, as per my original post and the item description.

[Tahoe]

8bit on the CF side, NOT on the IDE side.

Try looking for a SCSI cardreader, they do exist...

[Zac67]

CF interface actually is 99% IDE...
But The card permits 8-bit accesses if the user issues a Set Feature Command to put the device in 8-bit mode.
As Tahoe hinted, this seems to be some exotic CF mode that most probably isn't compatible with XT IDE either. There's noone there issueing that command anyway.

[LoadWB]

Yeah, Tahoe made a good point about the CF vs IDE thing.  I'm probably just fishing for a reason to buy the 8GB CF card  Could use it to replace the 4GB in my 1200 instead...