Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A2000T non-booting prob...  (Read 1160 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show only replies by keropi
A2000T non-booting prob...
« on: May 10, 2007, 08:23:34 AM »
I fired up today the A2000T I received, only to find out it does not boot or do anything...  :cry:
I stripped it only down to the 2630 cpu card and 1 floppy.... it powers on, the monitor picks a signal from the Macrosystem De-Interlace card, but it stays black... and the a2000 does not try to read from the floppy, where a wb3.1 disk is... (the A2000 has 3.1 rom)
plus, I press several times the CAPS-Lock key, and after a while it stucks... that is not a good sign...
there was battery leakage, but it did not affect much around the area, it is cleaned now, replaced and it looks OK, there is no acid in tracks etc...
any ideas what to try next? the trip was a bumpy one, some cards inside where loose when I got it....  
thanks!  :-D  :-D
Logged
 

Offline amiga92570

  • Hero Member
  • *****
  • Join Date: Aug 2006
  • Posts: 1005
    • Show only replies by amiga92570
Re: A2000T non-booting prob...
« Reply #1 on: May 10, 2007, 06:58:55 PM »
Maybe you should try it without the 2630 board and see if the stock motherboard will boot. Also after shipping it is a good idea to press down on all the socketed chips to make sure they are seated properly.  :idea:
Logged
Amiga92570
==========================
(1) 4000T/040 (2)3000t CS 060/233ppc Picasso IV video, (2)D-box 1200 blizzard 060/200ppc Mediator fastATA, (1)amiga 1200 Power tower, (1)amiga 1200 EZ tower with mediator,1200/030/50mhz, (3) amiga 500 with CSA Mega Midget Racer and Trump card AT, (2) amiga 600 one with M-tec 030, (3) CD32 one sx32, two sx32-pro, More accessories and parts than I want to admit to
 

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show only replies by keropi
Re: A2000T non-booting prob...
« Reply #2 on: May 10, 2007, 07:56:10 PM »
I tried with no 2630, reseated all chips and cleaning with special electronics spray... it just won't work...
Logged
 

Offline Rossi07

  • Newbie
  • *
  • Join Date: Mar 2007
  • Posts: 8
    • Show only replies by Rossi07
Re: A2000T non-booting prob...
« Reply #3 on: May 19, 2007, 11:09:50 PM »
Hi

Did you check the powersupply for any lost voltage ?
mayebee one of the cables to the motherboard have no voltage.

The powerleds , do they blink ?
So there is no activity at all ?

Just get all cards out and start it with minimum hardware as possible.

RR
Logged
 
Pages: [1]   Go Up
« previous next »