Welcome, Guest. Please login or register.

Author Topic: Elbox 1200FastATA Mk3 splitting drives!  (Read 4288 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline humppa

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 959
    • Show only replies by humppa
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #14 from previous page: March 03, 2006, 04:44:43 PM »
Quote
i wanted to get the IDEfix express, but i couldn't find anyone selling them


Amigakit is listing the Express. I got mine from Vesalia, although it says "please call" on their website (it was in stock though).
You could always ask Jens Schoenfeld directly if noone has it in stock.
 

Offline amigakit

Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #15 on: March 03, 2006, 04:50:28 PM »
I can confirm that IDEFIX Express is in stock here
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

  • Guest
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #16 on: March 03, 2006, 04:51:15 PM »
I find the IDEFix'97 drivers to be more stable than the FastATA'99 drivers from Elbox, not to mention easier to use.

I don't think they are as fast though.
 

Offline humppa

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 959
    • Show only replies by humppa
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #17 on: March 03, 2006, 05:08:09 PM »
Quote
I don't think they are as fast though.


The Idefix Express speed is very dependent on the bus speed of your accelerator. Jens mentioned that you actually get the highest transferrate with a 42Mhz 68030 (runs synchronous then) while the speed is rather slow with a 1260.

With my Apollo 1240/40, Idefix Express flies (around 4.8 MB/s).
 

  • Guest
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #18 on: March 03, 2006, 05:34:13 PM »
Quote

humppa wrote:
Quote
I don't think they are as fast though.


The Idefix Express speed is very dependent on the bus speed of your accelerator. Jens mentioned that you actually get the highest transferrate with a 42Mhz 68030 (runs synchronous then) while the speed is rather slow with a 1260.

With my Apollo 1240/40, Idefix Express flies (around 4.8 MB/s).


I have a BPPC200/040-25, I'll run a diskspeed test later using the IDEFix'97 drivers on the FastaATA-Mk3 and report back.
 

Offline amigakit

Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #19 on: March 03, 2006, 05:45:01 PM »
Heres some SysSpeed Drive results from a FastATAMK-II on this A1200 with BlizzPPC 060:

CreateFile 5.61 MB/sec
WriteFile  5.93 MB/sec
ReadFile   5.08 MB/sec
RawRead    4.90 MB/sec
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline humppa

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 959
    • Show only replies by humppa
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #20 on: March 03, 2006, 06:40:22 PM »
Ok this is what I get in SysSpeed using Idefix Express:

CreateFile 5.58 MB/sec
WriteFile 5.95 MB/sec
ReadFile 4.63 MB/sec
RawRead 4.77 MB/sec
 

Offline VooDoo

  • Sr. Member
  • ****
  • Join Date: Mar 2002
  • Posts: 284
    • Show only replies by VooDoo
    • http://www.voodoo-amiga.com/
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #21 on: March 03, 2006, 07:00:08 PM »
its not bad results..what is price for IdeXif Exprex?I pay my MK-III on Elbox action 69eur!
--
A1200 sandwich :)

uA1c/g3-800 mHz/512mb/160gb hdd/OS4.1 Final + upd #1 :-D :worship

MacMini G4 1.5ghz 1GB ram + MorphOS 3.9

 Croatian Amiga portal
 

Offline dawiper

  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 113
    • Show only replies by dawiper
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #22 on: March 03, 2006, 07:30:37 PM »
I tried sysspeed on my old Power Flyer "Fast ATA-2".

Create File:6.62
Write File:6.94
Read File6.95
Raw Read:7.40

This is with a 030/40 cpu on a old xbox disk(WD).
A1200+Apollo 030/40+32mb fast+powerflyer in custom tower
 

Offline humppa

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 959
    • Show only replies by humppa
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #23 on: March 03, 2006, 07:43:57 PM »
Quote
ts not bad results..what is price for IdeXif Exprex?I pay my MK-III on Elbox action 69eur!


Vesalia sold the Idefix Express (both 4-way adaptor and Express module) to me for EUR 46,80.
Can't complain about the price.  :-)
 

Offline VooDoo

  • Sr. Member
  • ****
  • Join Date: Mar 2002
  • Posts: 284
    • Show only replies by VooDoo
    • http://www.voodoo-amiga.com/
Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #24 on: March 04, 2006, 03:56:46 PM »
Yeah price is very good! Now i see Elbox sell MK-III for 90$ !!
--
A1200 sandwich :)

uA1c/g3-800 mHz/512mb/160gb hdd/OS4.1 Final + upd #1 :-D :worship

MacMini G4 1.5ghz 1GB ram + MorphOS 3.9

 Croatian Amiga portal
 

Offline darksun9210Topic starter

Re: Elbox 1200FastATA Mk3 splitting drives!
« Reply #25 on: March 08, 2006, 01:13:54 PM »
hmmm, this drive splitting thing is doing my nut.

i'll see if i can get some time this evening to work on it, otherwise, i'm going to see if i can get a couple of IDE to SCSI converters.

why am i using an interupt driven IDE interface that chews CPU time, when i have a DMA capable scsi controller able to push data twice as fast?

oh yeah, each adapter per drive costs £50.... thats why  :lol:

A500, A600, A1200x3, A2000, A3000, A4000 & a CD32.
and probably just like the rest of you, crates full of related "treasure" for the above XD