Welcome, Guest. Please login or register.

Author Topic: DKB Cobra 030@28 - any good?  (Read 2378 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline rockstarTopic starter

  • Newbie
  • *
  • Join Date: Nov 2005
  • Posts: 8
    • Show only replies by rockstar
DKB Cobra 030@28 - any good?
« on: November 24, 2005, 12:26:08 PM »
I'm considering buying one of those for my A1200 since the Blizzard 1230's are so expensive.

The primary reason I want a 030 is that I want to run OS 3.9.

Should I go for the Blizzard 1230 or the Cobra? What is a reasonable price for the Cobra?
 

Offline Argus

  • Hero Member
  • *****
  • Join Date: Jul 2004
  • Posts: 942
    • Show only replies by Argus
Re: DKB Cobra 030@28 - any good?
« Reply #1 on: November 24, 2005, 12:34:27 PM »
There's a reason for the price difference, other than MHz.  The DKB boards needed a firmware update to run OS3.1.  So with the Cobra, unless you are lucky to find one with the update, will have you stuck in OS3.0.  Then you'd need to figure out some clever way of soft-kicking into 3.1 so you could install 3.9.  I've never done it, maybe someone here has found a way?  My advice, bite the bullet and get a Blizzard MarkIV (or better yet a Blizz1260).  btw, since BlizzardPPCs with 68060s seem to be fetching only around $350-400US right now on eBay, you might want to bite a little harder, pay roughly double what you'd pay for a 68030 and have a real monster A1200 (provided your not limiting yourself to just an A1200 desktop original).
posted on A2500+ C=2620 14MHz/8MbFast/1MbChip
dialed in @34K
Just livin\\\' the dream...
 

Offline prowler

  • Full Member
  • ***
  • Join Date: Sep 2002
  • Posts: 182
    • Show only replies by prowler
Re: DKB Cobra 030@28 - any good?
« Reply #2 on: November 24, 2005, 03:33:13 PM »
I was probably unlucky but I bought a DKB Cobra years ago for my A1200 (around the mod 90's). I found it to be extremely flaky and particular with it's seating in the trap door slot. I would get a lot yellow screens on power on/reboot as well as random lock ups. Take the card out, all worked well (except I was stuck with a 020/2Meg 1200).

It eventually stopped working about 1-2 years ago so I recently bought a Blizzard 1230 off EBay and have had no problems at all, which was a realief since I always had a nigling worry that there was something wrong with the 1200 causing the problems. I am now planning on getting hold of some 3.1 ROMs to get 3.9 onto the machine now.
 

Offline spihunter

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1501
    • Show only replies by spihunter
Re: DKB Cobra 030@28 - any good?
« Reply #3 on: November 24, 2005, 04:55:28 PM »
I had one of these in my A1200 for years. I never had a problem with it. It was the scsi ad-on board that was really flaky.
 

Offline kevh100

  • Jr. Member
  • **
  • Join Date: Sep 2003
  • Posts: 52
    • Show only replies by kevh100
    • http://www.kphonline.co.uk
Re: DKB Cobra 030@28 - any good?
« Reply #4 on: November 24, 2005, 05:40:40 PM »
My 030@33Mhz with 68882 FPU and 64mb SIMM are still going strong today, god knows how many years after buying it. I'd buy one again :)

Kev
...
 

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: DKB Cobra 030@28 - any good?
« Reply #5 on: November 24, 2005, 06:15:39 PM »
I'm a real Phase5 fan, first turbo was a Blizzard1230MK3. But between that and my BlizzardPPC040 (later sold and now currently own a Blizzard1260 and a Blizzard1230MK4) I owned a rubbish Apollo1230/50 that would never work well (often lockup and guru for no apparent reason no matter hom much I tinkered with it) and a Cobra1230/33.

I belive the Cobra is a very nice card as long as you get a 3.1 compatible card and stick to the 33Mhz version (none EC CPU / Overclocked). Mine ran fine and was only replaced cause I involved myself in a maximum uppgrade mission for the A1200 and for that needed a PPC and GFX card solution. :-D

If you find a 33Mhz version that is 3.1 compatible and negotiate right you'll probably be able to get it for about 25$... but stay away from the overclocked 28Mhz version and the only EC 40Mhz version.

Offline motrucker

Re: DKB Cobra 030@28 - any good?
« Reply #6 on: November 26, 2005, 07:51:57 PM »
Odd mix of answers here. I have always had very good luck with all DKB stuff. I still use an '030 (40MHz I believe) with a 32 Mb simm that runs OS 3.5 with no trouble at all in my A1200. (I may upgrade to 3.9 some day) I even use the DKB SCSI with good luck (it is a pain to connected correctly, but once it is, it works well).
Good luck filtering through all this......

A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+