Overclocking Bppc 040????

[Peter_s]

Update:
-------
Well i overclocked the card to 200mhz and added an extra fan and its worked perfect, I've had no problems atall in the last 24 odd hours, except from one that nigling little curious voice that wonders about,if It could cope with being overclocked to the 231mhz??  I know its a case of flipping a coin but what do you guys think.

a) slight chance it will work!
b) should work!
c) Get ready for a BANG!!!!!!

Thanks in advance for any advice. :-)

[tomekm]

my worked at 225mhz so try!

it died, but not because of overclocking.

the card i had was problematic even at 175MHz...

...at 225 MHz it didn`t make no new problems, so...

...it should work for you.

[Peter_s]

thank you, i think out of interest I'll overclock it up again and if its dies , I always have my BPPC 060 to use. but if it doesnt die then its just a case of seeing how long it will lives for :-) and if its dies ,then I've just pushed the value of the rest of the BPPC cards up abit lol

[delshay]

@peter_s


i here have BLIZZPPC overclocked

060@67.66mhz
PPC@272mhz


PROBLEMS: im having problems with the clockport on the a1200..PRELUDE soundcard locks-up system under PPC games..
works fine on 68k games..


RAM SETTING: all set to pre-charged off..

[Peter_s]

Well I overclocked the card upto 233mhz, but I guess it was just to much for the card to handle.  The card seemed to work fine and with ppctool it was register as 233mhz but the only draw back was it refused to play heretic2 and payback the games would start to load and then just freeze. So I removed the card and put it back to the 200mhz and all the games work now. so i guess 233mhz is too much :-(