Welcome, Guest. Please login or register.

Author Topic: removing bad smell  (Read 5016 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2801
  • Country: 00
    • Show only replies by orange
removing bad smell
« on: September 11, 2004, 07:27:40 PM »
I've got a couple of A2000s that were stored god-knows-where, and that smell badly, especially when fan starts.
What would be the best way to get rid of that smell?
“Giving up is always an option, but not always a failure.”
 

Offline mikeymike

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 3420
  • Country: 00
    • Show only replies by mikeymike
Re: removing bad smell
« Reply #1 on: September 11, 2004, 07:28:59 PM »
What sort of smell?

If it is dust burning, then either vacuum clean it where possible, or let the dust burn itself out.
 

Offline Holley

  • Hero Member
  • *****
  • Join Date: May 2004
  • Posts: 888
    • Show only replies by Holley
    • http://www.Front-Runners.net
Re: removing bad smell
« Reply #2 on: September 11, 2004, 07:38:17 PM »
maybe pop the top off, and find out the cause?  Maybe there's a family of mice living in there ;-)
\\"Sex, drugs and rock n\\\' roll are very good for you\\" - Ian Dury
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2801
  • Country: 00
    • Show only replies by orange
Re: removing bad smell
« Reply #3 on: September 11, 2004, 07:52:50 PM »
Its hard to tell what sort of smell it is. Its strong, maybe like something burning, or rottening, I relly don't know. But its there when A2000 is turned off for indefinite time.
Reminds me a bit of cellar.
I'll clean the dust with vacuum cleaner, and the rest with magic wand slightly dampen in water (is that OK?).

We really need some reliable way of cleaning (the whole) PCB or motherboard, cause Amigas are getting very old..
“Giving up is always an option, but not always a failure.”
 

Offline Argo

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 3219
    • Show only replies by Argo
Re: removing bad smell
« Reply #4 on: September 11, 2004, 08:03:02 PM »
Disassemble the whole thing into its component parts and clean. If you use water, use distilled water and let the part completely dry. Get some of those compressed air cans, q-tips, isopropal achohol, etc.
My dad got a used computer of of eBay alittle over a year ago. The nearest we can figure was the guy was a smokaholic. Everything was yellowish brown and smelled stronly of smoke, then we turned it on. It just go stronger. It was a fun cleaning job.

oh, if you can take the PSU apart and clean it real well. Especially the fan. Otherwise you'll still get wafts of odor. Same with the CPU fan or any other fans in the system.
 

Offline KennyR

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 8081
    • Show only replies by KennyR
    • http://wrongpla.net
Re: removing bad smell
« Reply #5 on: September 11, 2004, 08:03:12 PM »
If you mean a musty smell, it's probably caused by some mild form of fungus or mould. Sometimes my shampoo smells like that if kept under the sink too long :()

Anyway, two pointers. When you hoover your PSU, be careful to IMMOBILISE THE FAN BLADE. If you don't, it'll spin hard and generate a current like a generator and could damage the PSU. Second, water is ok if not used on electronics, like the plastic fan blade. IPA (isopropyl alcohol) is better, but water is ok.

These kind of smells tend to dissapear with time, but if it really annoys you, you could open up the whole PSU and give it a clean, preferably with IPA.
 

Offline Hyperspeed

  • Hero Member
  • *****
  • Join Date: Jun 2004
  • Posts: 1749
    • Show only replies by Hyperspeed
Re: removing bad smell
« Reply #6 on: September 11, 2004, 08:44:19 PM »
Phoo!

I know the smell you mean... and I think it's electrolyte!

It smells of fishy or rotting flies, not sure why. Electrolyte may be an organic compound or it may just contain a lot of sulphur.

Don't know whether it's a leaked capacitor or battery, but it goes after a while, maybe a few months.

I did hear of one guy who kept his Amiga tower open for a while and one day he opened it after a bad smell and found a cooked mouse inside.

Mmmmm...
 

Offline JaXanim

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1120
    • Show only replies by JaXanim
    • http://www.intuitionbase.com/waveguide/home.html
Re: removing bad smell
« Reply #7 on: September 11, 2004, 10:00:44 PM »
@Hyperspeed

Goo..! Rotting flies! I know exactly what you mean.

Pull too hard on the zip, the whole thing comes away in your hand and you get a gaping hole letting in all the draught. Avoid rotting flies at all costs! ;)

Cheers,

JaX
Be inspired! It\\\'s back!
 

Offline Holley

  • Hero Member
  • *****
  • Join Date: May 2004
  • Posts: 888
    • Show only replies by Holley
    • http://www.Front-Runners.net
Re: removing bad smell
« Reply #8 on: September 11, 2004, 10:20:06 PM »
IIRC it's acetone in batteries (chemical reaction with the acidic elements), or something like that.

A guide to cleaning circuitboards can be found here (previously posted on A.org).  The circuitboard pictured is of similar construction to the A2000 one, though more use of the canned air may be in order!
\\"Sex, drugs and rock n\\\' roll are very good for you\\" - Ian Dury
 

Offline Hyperspeed

  • Hero Member
  • *****
  • Join Date: Jun 2004
  • Posts: 1749
    • Show only replies by Hyperspeed
Re: removing bad smell
« Reply #9 on: September 12, 2004, 01:00:05 AM »
Oh yeah, could be the batteries - hadn't thought about that.

The pungeant odour always used to waft into MY nostrills whenever
Windows would load though...

;-)
 

Offline Holley

  • Hero Member
  • *****
  • Join Date: May 2004
  • Posts: 888
    • Show only replies by Holley
    • http://www.Front-Runners.net
Re: removing bad smell
« Reply #10 on: September 12, 2004, 01:10:48 AM »
If you get a strong smell of burning while loading Windows it could be a sign that the Windows loading screen is inducing an epileptic fit, to be on the safe side just steer clear of PCs from now on.

;-)
\\"Sex, drugs and rock n\\\' roll are very good for you\\" - Ian Dury
 

Offline Ni72ous

  • Sr. Member
  • ****
  • Join Date: Feb 2003
  • Posts: 406
    • Show only replies by Ni72ous
Re: removing bad smell
« Reply #11 on: September 12, 2004, 01:24:48 AM »
Well cleansing computer odours just came up on slashdot check it here
Ni72ous
 

Offline Holley

  • Hero Member
  • *****
  • Join Date: May 2004
  • Posts: 888
    • Show only replies by Holley
    • http://www.Front-Runners.net
Re: removing bad smell
« Reply #12 on: September 12, 2004, 01:29:35 AM »
lol, I used to work as a butcher, he has my sympathies!

The smell from a rendering plant is worse than just blood, too ... easier to get rid of though.
\\"Sex, drugs and rock n\\\' roll are very good for you\\" - Ian Dury
 

Offline TjLaZer

Re: removing bad smell
« Reply #13 on: September 12, 2004, 03:04:36 AM »
I would strip the whole thing down and clean the MB with a damp soft cloth.  Then I would use simple green and water and a soft scrub on the case and other parts.  Dry it and let it dry over night.  All should be good!  I have cleaned may a smoked out and dirty vintage computers this way.
Going Bananas over AMIGAs since 1987...

Looking for Fusion Fourty PNG ROMs V3.4?

:flame: :banana: :banana: :banana:
 

Offline Hyperspeed

  • Hero Member
  • *****
  • Join Date: Jun 2004
  • Posts: 1749
    • Show only replies by Hyperspeed
Re: removing bad smell
« Reply #14 on: September 12, 2004, 03:56:01 AM »
@Holley

During your time working as a butcher how many horses did you carve?

I can taste it right now... fillet of filly.

The French make a good corned beef from little wild Shetlands too,
bit too bony(/pony) for my liking.

:-D :-D :-D :-D :-D