Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: IDE Question  (Read 1179 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline CloonedTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2003
  • Posts: 77
    • Show only replies by Clooned
IDE Question
« on: June 14, 2004, 10:16:19 PM »
In my A1 I have 1 HD and 1 DVD reader in the first IDE channel  and the CD burner alone in the second one.

I want to buy another HD to install my future AOS4 pre-release  copy and I have one doubt. Is better to have the 2 HDs in the same channel or the 2 HDs as masters in separated channels?

Thank you!
Logged
 

Offline Effy

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 2053
    • Show only replies by Effy
Re: IDE Question
« Reply #1 on: June 14, 2004, 10:21:10 PM »
From a logical point of view, it seems better to have the booting harddisc at the first port and set as master ... :-)
Logged
 

Offline JaXanim

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1120
    • Show only replies by JaXanim
    • http://www.intuitionbase.com/waveguide/home.html
Re: IDE Question
« Reply #2 on: June 14, 2004, 10:23:10 PM »
The BOOT partition should be on Channel 1 as Master (according to the Elbox/PowerFlyer Gold manual).

Devices set as Master and Slave on any channel will transfer data at the speed of the slower device. This means you'll get better performance if your Hard Drives are on the same channel and slower (CD-ROM, etc) drives are on the other channel.

Cheers,

JaX

Logged
Be inspired! It\\\'s back!
 

Offline CloonedTopic starter

  • Jr. Member
  • **
  • Join Date: Jan 2003
  • Posts: 77
    • Show only replies by Clooned
Re: IDE Question
« Reply #3 on: June 14, 2004, 11:11:21 PM »
thank you for yours answers!

I know it was a silly question but I never readed something about it and it was an old doubt I has.
Logged
 
Pages: [1]   Go Up
« previous next »