Welcome, Guest. Please login or register.

Author Topic: Eide99 issue  (Read 2176 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amipowerTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 13
    • Show only replies by amipower
Eide99 issue
« on: March 03, 2014, 04:38:30 PM »
Hi all,

I am currently towerising my a1200. I run in to some problems an one of them is that I cannot get the buffered ide controller to work propely.

I installed AOS 3.1 with a CF an DVD ROM attached to de controller. No problems with installing the OS.

Next I installed the EIDE'99 and cachecdfs software. All hardware is detected during the install. The version of EIDE is from 2013.

After reboot, all I get is " You must replace volume Amiga OS in SDH0"

Also, when I try to connect any hardware to the 2nd port. The amiga will not boot at all.

Any ideas?
 

Offline Oldsmobile_Mike

Re: Eide99 issue
« Reply #1 on: March 03, 2014, 06:21:22 PM »
Backtrack your steps. You said you were able to install the OS and everything worked fine until you "installed the EIDE'99 and cachecdfs software"? Check your startup-sequence, anything looking for volume SDH0:?
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline amipowerTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 13
    • Show only replies by amipower
Re: Eide99 issue
« Reply #2 on: March 03, 2014, 06:35:29 PM »
Nothing looking for sdh0.

I ; c:4xeide.driver from startup sequence. Now it boots again.

Forgot to mention that I still have no cdrom, nor is the 2nd port working.
« Last Edit: March 03, 2014, 10:39:25 PM by amipower »
 

Offline amipowerTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 13
    • Show only replies by amipower
Re: Eide99 issue
« Reply #3 on: March 09, 2014, 05:22:22 PM »
Anyone? I could really use some help.
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Eide99 issue
« Reply #4 on: March 09, 2014, 06:19:32 PM »
Quote from: amipower;760430
Anyone? I could really use some help.


I don't post here anymore but I know how it feels looking for support for Amiga stuff. I have the same hardware and also had various problems with it.

I recommend removing the software it comes with and install:

http://aminet.net/package/disk/misc/IDEfix97

Then put the command below near or at the top of the startup-sequence:

C:IDEFix

Will PM you with other needed info :-)
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline amipowerTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 13
    • Show only replies by amipower
Re: Eide99 issue
« Reply #5 on: March 09, 2014, 07:51:24 PM »
IDEfix works, but I still cannot use the 2nd port on de buffered ice device.

thnx btw Lurch.
 

Offline Oldsmobile_Mike

Re: Eide99 issue
« Reply #6 on: March 09, 2014, 08:11:17 PM »
A longshot, but are you able to test the interface on any other machine?  Are you 100% certain that the second port is working?
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline skolman

  • Full Member
  • ***
  • Join Date: Oct 2007
  • Posts: 106
    • Show only replies by skolman
    • http://stagevu.com/user/skolman_mws
Re: Eide99 issue
« Reply #7 on: March 10, 2014, 12:09:02 AM »
Quote from: amipower;760108
Next I installed the EIDE'99 and cachecdfs software.

EIDE'99 has AllegroCDFS http://www.elbox.com/downloads_4xeide.html
« Last Edit: March 10, 2014, 11:08:48 AM by skolman »
A1200 BlizzardPPC BVision Lan/WiFi FastATA Gold,
EFIKA 5K2 R9250 MorphOS +Amiga Workbench
https://youtu.be/mjsGVkDjBOc
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Eide99 issue
« Reply #8 on: March 10, 2014, 04:05:23 AM »
Quote from: amipower;760440
IDEfix works, but I still cannot use the 2nd port on de buffered ice device.

thnx btw Lurch.



Interesting that because all working fine here with my DVD writer on the 2nd channel. Does the idefix prefs show the 2nd drive?
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Eide99 issue
« Reply #9 on: March 10, 2014, 04:23:41 AM »
During the install it should give you the devices to select for the DVD/CD drive. Select the scsi.device. Then it should show the DVD/CD drive on the right hand side, select it.

On the next step should select the device (usuaully CD2) which is the mountlist which will mount the DVD/CD drive.

The CD2 device can be found in DEVS : Dosdrivers once it's installed.
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline amipowerTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 13
    • Show only replies by amipower
Re: Eide99 issue
« Reply #10 on: March 15, 2014, 02:04:44 PM »
Quote from: Lurch;760471
Interesting that because all working fine here with my DVD writer on the 2nd channel. Does the idefix prefs show the 2nd drive?


It doesn't boot all with a 2nd drive attached. Tried it in another A1200, same issue.

Think it is defective.
 

Offline Dwyloc

  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 208
    • Show only replies by Dwyloc
Re: Eide99 issue
« Reply #11 on: March 15, 2014, 06:09:58 PM »
Quote from: amipower;760794
It doesn't boot all with a 2nd drive attached. Tried it in another A1200, same issue.

Think it is defective.


Silly question time have to cheeked the jumpers on your drives are set correctly?

With one drive set as master and the other set as slave on each cable/connector as modern sata drives dont need jumpers set this is something worth double checking for an Amiga IDE setup.
Sam440ep 667mhz 512megs OS4.1
Minimig, 4MB RAM, ARM add-on board
Amiga 1200 Eyetech mk4 Tower, Blizzard 1240 040/40 32MB Fast ram, IDEFix Express mk2, mediatorSX pci, Voodoo3 PCI, PCI network card, OS3.9 BB2.
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: Eide99 issue
« Reply #12 on: March 15, 2014, 07:49:21 PM »
Quote from: Dwyloc;760809
Silly question time have to cheeked the jumpers on your drives are set correctly?

With one drive set as master and the other set as slave on each cable/connector as modern sata drives dont need jumpers set this is something worth double checking for an Amiga IDE setup.



Also the Eide doesn't work too well with cable select.
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub