Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Amiga 3000 and LCD Help  (Read 1591 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline matt3kTopic starter

Amiga 3000 and LCD Help
« on: March 21, 2012, 03:56:29 AM »
I'm trying to get my 3000 to work with a westinghouse 2220HW LCD.

I thought it would just come up if I plugged it into the 3000 vga port.  I even tried to get it working on the Retina Z3 and played by the screen modes...

Any ideas?
Logged
 

Offline amiman99

Re: Amiga 3000 and LCD Help
« Reply #1 on: March 21, 2012, 12:36:31 PM »
First, make sure that the switch is enabled in the back.
Second, I'm not sure what resolution you are running, but it looks like it will not work in PAL 50Hz mode. Minimum is 56Hz.

Hope it helps.
Logged
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
CDTV KS 3.1, 4MB RAM
CD32
(AROS BOX) Dead :(
 

Offline dougal

  • Hero Member
  • *****
  • Join Date: Oct 2005
  • Posts: 1221
    • Show only replies by dougal
Re: Amiga 3000 and LCD Help
« Reply #2 on: March 21, 2012, 02:01:47 PM »
I had a similar(ish) problem.

DCE ScanMagic would only work with one of my LCD monitors and only if I set the Amiga to NTSC and the display was not nice at all. Lots of vertical lines.

Picasso II with Picasso mode set would not work either with my LCD's.

Got a cheap SD/FF off ebay and all my miggies work with ALL my LCD's and even the Picasso modes seem to work fine with the LCD's too.
Logged
A1200HD- Blizzard 1230IV / 64Mb / Kick 3.1 / OS 3.9 / 20GB HD
A4000 040 @33Mhz -Kick 3.1 / 16MB
A2000 Rev4.4 - \'030 @25Mhz / 8MB / Kick 3.1 / ClassicWB
CD32 -     Stock (W/ 2 CD32 Controllers]
A500 Plus - 68000 / 2MB Chip / 2Mb Fast / 2.04/1.3 / A590 / A570
A600HD - 2MB Chip / 8MB Fast / 2GB CF HD / Kick 3.1
CDTV

PowerMac G4 1Ghz (MorphOS / Leopard)

[url]http://amigamap.com/us
 

Offline matt3kTopic starter

Re: Amiga 3000 and LCD Help
« Reply #3 on: March 22, 2012, 03:26:34 AM »
This LCD must be a piece of junk.  Wouldn't recommend the L2220HW, it doesn't even come up on the standard Amiga 3k video (NTSC), tried a bunch of cybermodes off the z3 and that didn't work either.  Works just fine on this Peg II with MOS.

Funny Morphos uses a newer version of cybergraphix and it works fine.

Strange...
Logged
 
Pages: [1]   Go Up
« previous next »