Welcome, Guest. Please login or register.

Author Topic: Cheap upscaler  (Read 1132 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mojo1999Topic starter

  • Newbie
  • *
  • Join Date: Aug 2010
  • Posts: 12
    • Show only replies by mojo1999
Cheap upscaler
« on: March 05, 2012, 10:42:38 PM »
Hi
   
  Just got one of these for my 1200.  
   
  http://www.ebay.co.uk/itm/CGA-EGA-YUV-RGB-TO-VGA-converter-1-VGA-output-arcade-game-board-PCB-Brand-New?item=260947539632&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D1%26po%3DLVI%26ps%3D63%26clkid%3D6795879106741393418
   
  Can some on help me with the Amiga video connector.  
   
  I have connected pin 3,4,5 (amiga) to RGB (scaler) and pin 10 (amiga) to sync (scaler).
   
  I connected the ground on the upscaler board to one of the ground connectors, pin 16 on the amiga video connector.
   
  I fired it up and it gave me a display at 800x600.
   
  The picture looks good, however I’m seeing grey lines in the image, especially on the kickstart screen.
   
     1)  Are these the correct pins on the amiga port

  2)      do I have to connect all the ground pins?
  3)      Is this a problem with the 1200?


   
  Overall the picture is not bad and is a cost effective way of using your amiga on an LCD display.
   
  Many thanks
 

Offline spaceman88

  • Sr. Member
  • ****
  • Join Date: Feb 2006
  • Posts: 457
    • Show only replies by spaceman88
Re: Cheap upscaler
« Reply #1 on: March 06, 2012, 12:30:49 AM »
Quote from: mojo1999;682602
Hi
   
  Just got one of these for my 1200.  
   
  http://www.ebay.co.uk/itm/CGA-EGA-YUV-RGB-TO-VGA-converter-1-VGA-output-arcade-game-board-PCB-Brand-New?item=260947539632&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D1%26po%3DLVI%26ps%3D63%26clkid%3D6795879106741393418
   
  Can some on help me with the Amiga video connector.  
   
  I have connected pin 3,4,5 (amiga) to RGB (scaler) and pin 10 (amiga) to sync (scaler).
   
  I connected the ground on the upscaler board to one of the ground connectors, pin 16 on the amiga video connector.
   
  I fired it up and it gave me a display at 800x600.
   
  The picture looks good, however I’m seeing grey lines in the image, especially on the kickstart screen.
   
     1)  Are these the correct pins on the amiga port

  2)      do I have to connect all the ground pins?
  3)      Is this a problem with the 1200?


   
  Overall the picture is not bad and is a cost effective way of using your amiga on an LCD display.
   
  Many thanks


Are the lines vertical? Does your monitor have a "pixel clock" adjustment? That's what I had to adjust to get my ST2320L to work well in PAL mode (with no scan doubler however so your results could vary).