Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Formatting and installing Workbench 3.1 on a CF from WinUAE  (Read 6859 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show only replies by Everblue
Formatting and installing Workbench 3.1 on a CF from WinUAE
« on: December 26, 2011, 07:57:39 PM »
I would like to prepare a 128MB compact flash (to use in the nearby future on a real Amiga with an IDE->CF adapter) using WinUAE.

I have selected (in WinUAE) "add Hard Drive" and then selected the Compact Flash, but nothing comes up win Winuae once Workbench loads from an HDF file with Workbench in it.

Am I missing something? Cheers!
Logged
 

Offline Snoozy

  • Sr. Member
  • ****
  • Join Date: Sep 2011
  • Posts: 251
    • Show only replies by Snoozy
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #1 on: December 26, 2011, 08:09:34 PM »
I had a similar problem a while ago and i hope this thread will help you:

http://www.amiga.org/forums/showthread.php?t=59560

:)
Logged
 

Offline CritAnime

  • Previous Life Time Member
  • Hero Member
  • *****
  • Join Date: Jun 2011
  • Posts: 1143
    • Show only replies by CritAnime
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #2 on: December 26, 2011, 08:29:09 PM »
Run WinUAE as admin, through right click menu, add the hdd and if your wanting to format then make sure it's set to IDEO as the controller so the HDToolbox picks it.
 
Is there an OS already on there? Also remember to set any partitions to a max transfer of 0x1fe00 and hit return. Otherwise you will run into issues on a real Amiga. I would also reccomend doing a clean of the card using diskpart before doing anything else with it.
Logged
 

Offline actung_bab

  • Hero Member
  • *****
  • Join Date: Oct 2006
  • Posts: 650
    • Show only replies by actung_bab
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #3 on: December 26, 2011, 09:12:36 PM »
gee this great forum was just going try get my bbs going on uae and its on compact flash card

cheers going try today b4 go back to work tommrow
Logged
Acthung baby
http://telnet://midnight-blue.dyndns.org
Cnet 4.60 PRO bbs software
Amiga 1200 020 14 mhz mbz 1200 z pcmcia network card 4 meg ram 2 Gb scandisk cf
Amiga 2000 020
Amiga 4000 030 25 mhz broken
Amiga x 4 1200
x 6 Sony Ps 3 Orginal 60 gb 4  port usb 160 gb hd (os 4.1 ready :-)
what can i say i like thse machines
x 3 XBOX 360 1x xbox 360 slim
url=http://avatars.jurko.net][/
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show only replies by Everblue
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #4 on: December 26, 2011, 10:48:42 PM »
"Also remember to set any partitions to a max transfer of 0x1fe00 and hit return."

Where do I do that please? Cheers!
Logged
 

Offline CritAnime

  • Previous Life Time Member
  • Hero Member
  • *****
  • Join Date: Jun 2011
  • Posts: 1143
    • Show only replies by CritAnime
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #5 on: December 26, 2011, 10:58:12 PM »
It's done in either HDToolBox or HDInstTool (this tool needs downloading from http://www.classicamiga.com/content/view/5006/175/ or from aminet) and it's in partitions then advanced options on the partition screen. Make sure that there are only two 00's on the end otherwise it will cause bad block and read issues.
Logged
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show only replies by Everblue
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #6 on: December 26, 2011, 11:04:01 PM »
WOrked great =) - thanks!
Logged
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show only replies by Everblue
Re: Formatting and installing Workbench 3.1 on a CF from WinUAE
« Reply #7 on: December 27, 2011, 08:48:49 AM »
Ok, this morning I would like to do something else. I want to create a 10GB .HDF file in SFS file system.

In WinUAE I have created Amiga.hdf file (10GB) as SFS and I can see the icon in Workbench (always in WinUAE of course). I have tried to format it using SFSFormat but I get this error:

Error whilte initializing the drive: packet request type unkown

Have I missed something, somewhere?

Thanks!
Logged
 
Pages: [1]   Go Up
« previous next »