BlizzardPPC fan type/size?

[x56h34]

I believe that a standard laptop cooling fan 25mm x 25mm x 10mm is the one used on BPPC cards (DC 5V), correct?

[Brian]

That sounds about right yes, at least the 25mm*25mm 5V bit... not entierly sure about the height.

[x56h34]

The higher it is the better cooling it directs to the target! :-) Ideally I'd want a 20mm height, but it's OK at 10mm I guess. :-)

[futaura]

I believe that a standard laptop cooling fan 25mm x 25mm x 10mm is the one used on BPPC cards (DC 5V), correct?

No.  It's 30mm x 30mm 5VDC.  Mine was 6mm high.  This is what phase5 fitted anyway.  The model was a AD0305LX-K70 Hypro from ADDA USA - see the specs.

As you might guess my fan died recently.  I pondered about fitting a larger fan, but it's such a tight fit, I decided to cut my losses and buy a fan of the same size for some extorniate amount of money :-)  The model I chose has about twice the airflow, yet only uses a tiny amount of extra power compared to the original fan.  And I bought it from Farnell - code 371-9844.

[Ryu]

if anyone finds a cheap source for these fans please let me know :-)