Welcome, Guest. Please login or register.

Author Topic: A1200 composite output?  (Read 2560 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
A1200 composite output?
« on: September 08, 2011, 07:16:53 PM »
I might have a deal for a dirt cheap monitor with a composite input. Question is.. would I get colour or greyscale from the A1200 through composite?

I've tried hooking it up to a TV and only received grey, but this was a PAL machine to an NTSC tv.

Anyone tried this with a computer monitor?


Ugh.. that was supposed to read composite. Can't edit the title
« Last Edit: September 08, 2011, 09:19:49 PM by runequester »
 

Offline spaceman88

  • Sr. Member
  • ****
  • Join Date: Feb 2006
  • Posts: 457
    • Show only replies by spaceman88
Re: A1200 component output?
« Reply #1 on: September 08, 2011, 08:31:17 PM »
Quote from: runequester;658507
I might have a deal for a dirt cheap monitor with a composite input. Question is.. would I get colour or greyscale from the A1200 through componsite?

I've tried hooking it up to a TV and only received grey, but this was a PAL machine to an NTSC tv.

Anyone tried this with a computer monitor?


Ugh.. that was supposed to read composite. Can't edit the title


I think it will depend on the monitor. I had colour on a NTSC A1200 in PAL mode connected to a Commodore monitor. Any chance you can try it first?
 

Offline fishy_fiz

  • Hero Member
  • *****
  • Join Date: Jan 2005
  • Posts: 1813
    • Show only replies by fishy_fiz
Re: A1200 component output?
« Reply #2 on: September 08, 2011, 09:02:46 PM »
Quote from: runequester;658507
I might have a deal for a dirt cheap monitor with a composite input. Question is.. would I get colour or greyscale from the A1200 through componsite?

I've tried hooking it up to a TV and only received grey, but this was a PAL machine to an NTSC tv.

Anyone tried this with a computer monitor?


Ugh.. that was supposed to read composite. Can't edit the title


Theres probably a few exceptions, but Id imagine most likely it'll be color. As for the title of the thread, did you also notice you went half/half later in your post ? :)  (componsite)
Near as I can tell this is where I write something under the guise of being innocuous, but really its a pot shot at another persons/peoples choice of Amiga based systems. Unfortunately only I cant see how transparent and petty it makes me look.
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: A1200 component output?
« Reply #3 on: September 08, 2011, 09:11:39 PM »
You can edit the the title in advanced mode. ;)

BTW: Composite sucks - it's good enough for games but a pain for serious stuff.
 

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A1200 component output?
« Reply #4 on: September 08, 2011, 09:13:42 PM »
Quote from: Zac67;658525
You can edit the the title in advanced mode. ;)

BTW: Composite sucks - it's good enough for games but a pain for serious stuff.


ah thanks :)

and yes, it does suck.
Right now though, Im stuck with VGA. Which works great for workbench and like 7 games ;)


Got some options for a better solution but Im terminally broke right now
 

Offline fishy_fiz

  • Hero Member
  • *****
  • Join Date: Jan 2005
  • Posts: 1813
    • Show only replies by fishy_fiz
Re: A1200 component output?
« Reply #5 on: September 08, 2011, 09:31:36 PM »
Doom, heretic, quake, Simcity, simcity2000, napalm, onescapee, genetic species, dynamite, gloom3, earth2140, trapped, trapped2, payback, descent, descent2, freespace, nightlong, scummvm, shadow of the 3rd moon, F1 virtual gp, exodus and a bunch of others should hopefully keep you entertained for a while if youre restricted to system friendly software for the moment. Im not sure many people realise just how many games can used @31-ish khz, either via mode promotion, or just through a games inbuilt screenmode requestors.   :)
Near as I can tell this is where I write something under the guise of being innocuous, but really its a pot shot at another persons/peoples choice of Amiga based systems. Unfortunately only I cant see how transparent and petty it makes me look.
 

Offline utri007

Re: A1200 composite output?
« Reply #6 on: September 08, 2011, 09:34:13 PM »
Quote from: runequester;658507
I might have a deal for a dirt cheap monitor with a composite input. Question is.. would I get colour or greyscale from the A1200 through composite


Somebody should import some LCD-TVs from europa to USA.

Scart connector is so good way to connect amigas, flicker free and sharp image.
ACube Sam 440ep Flex 800mhz, 1gb ram and 240gb hd and OS4.1FE
A1200 Micronic tower, OS3.9, Apollo 060 66mhz, xPert Merlin, Delfina Lite and Micronic Scandy, 500Gb hd, 66mb ram, DVD-burner and WLAN.
A1200 desktop, OS3.9, Blizzard 060 66mhz, 66mb ram, Ide Fix Express with 160Gb HD and WLAN
A500 OS2.1, GVP+HD8 with 4mb ram, 1mb chip ram and 4gb HD
Commodore CDTV KS3.1, 1mb chip, 4mb fast ram and IDE HD
 

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A1200 component output?
« Reply #7 on: September 08, 2011, 09:34:33 PM »
Quote from: fishy_fiz;658529
Doom, heretic, quake, Simcity, simcity2000, napalm, onescapee, genetic species, dynamite, gloom3, earth2140, trapped, trapped2, payback, descent, descent2, freespace, nightlong, scummvm, shadow of the 3rd moon, F1 virtual gp, exodus and a bunch of others should hopefully keep you entertained for a while if youre restricted to system friendly software for the moment. Im not sure many people realise just how many games can used @31-ish khz, either via mode promotion, or just through a games inbuilt screenmode requestors.   :)

Gloom worked but kinda crap.
EDIT: Not that Gloom is crap, its awesome, it just ran worse than in normal PAL mode for some reason.

I couldn't get Genetic Species or Trapped to play nice for some reason. I'll have to mess with it more. I could waste some hours on those two alone.
 

Offline fishy_fiz

  • Hero Member
  • *****
  • Join Date: Jan 2005
  • Posts: 1813
    • Show only replies by fishy_fiz
Re: A1200 component output?
« Reply #8 on: September 08, 2011, 09:43:15 PM »
Yeah, unfortunately they will be slowet. Probably little more than 1/2 "normal" speed. Sucks a bit I guess considering a lot of the better games will be 3d.
I think genetic species needs the updates to work in non pal/ntsc modes too by the way.

Soliton is a pretty darn good version of solitare if you get desperate :)
Near as I can tell this is where I write something under the guise of being innocuous, but really its a pot shot at another persons/peoples choice of Amiga based systems. Unfortunately only I cant see how transparent and petty it makes me look.
 

Offline Daedalus

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 893
    • Show only replies by Daedalus
    • http://www.robthenerd.com
Re: A1200 component output?
« Reply #9 on: September 08, 2011, 09:44:02 PM »
If you're running on the native chipset, VGA modes are slower than PAL/NTSC modes due to the increased bandwidth they require, and so graphics-intensive games can suffer... I'd guess that's the issue with Gloom. There must be a market for importing cheap LCD TVs with SCART cables into the States though - AmigaKit? :)
Engineers do it with precision
--
http://www.robthenerd.com
 

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A1200 component output?
« Reply #10 on: September 08, 2011, 10:01:06 PM »
Quote from: fishy_fiz;658533
Yeah, unfortunately they will be slowet. Probably little more than 1/2 "normal" speed. Sucks a bit I guess considering a lot of the better games will be 3d.
I think genetic species needs the updates to work in non pal/ntsc modes too by the way.

Soliton is a pretty darn good version of solitare if you get desperate :)

For most of them so far, its been okay actually. Gloom was the only one that was noticeably worse. Nemac IV runs like a charm, but maybe that one just plays nice.

THanks for the suggestions btw people


edit: Tried the update and I can't get Genetic Species to work in VGA mode. Any suggestions? No graphics card here.
Trapped works for the main menu, but doesn't work when you get into the game itself
« Last Edit: September 08, 2011, 11:02:49 PM by runequester »
 

Offline desiv

  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 1270
    • Show only replies by desiv
Re: A1200 composite output?
« Reply #11 on: September 08, 2011, 11:36:26 PM »
Quote from: runequester;658507
Anyone tried this with a computer monitor?

As composite is usually either NTSC or PAL, my money would be that the composite output of the PAL A1200 will show as monochrome on an NTSC composite monitor...  :(
You're talking displaying NTSC from your PAL 1200 to the NTSC monitor?
If you're trying to output PAL screens from your PAL 1200 to the NTSC monitor, I'd be surprised if you get a picture even...

You never know tho..

desiv
Amiga 1200 w/ ACA1230/28 - 4G CF, MAS Player, ext floppy, and 1084S.
Amiga 500 w/ 2M CHIP and 8M FAST RAM, DCTV, AEHD floppy, and 1084S.
Amiga 1000 w/ 4M FAST RAM, DUAL CF hard drives, external floppy.
 

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A1200 composite output?
« Reply #12 on: September 08, 2011, 11:46:58 PM »
Quote from: desiv;658549
As composite is usually either NTSC or PAL, my money would be that the composite output of the PAL A1200 will show as monochrome on an NTSC composite monitor...  :(
You're talking displaying NTSC from your PAL 1200 to the NTSC monitor?
If you're trying to output PAL screens from your PAL 1200 to the NTSC monitor, I'd be surprised if you get a picture even...

You never know tho..

desiv


yeah, PAL 1200. Hm, doesn't sound too good then.
 

Offline runequesterTopic starter

  • It\'s Amiga time!
  • Hero Member
  • *****
  • Join Date: Oct 2009
  • Posts: 3695
    • Show only replies by runequester
Re: A1200 component output?
« Reply #13 on: September 09, 2011, 05:13:41 AM »
okay, can't get Shadow of the third moon to work without a CD. I'll mess with it more tomorrow.

On the upside, Onescapee looks amazing. Stunning intro.