Replace CS PPC, CV PPC, Voodoo coolers

[easy_john]

http://www.fluke.com/fluke/usen/Thermal-Imaging/Fluke-Ti50-Series.htm?PID=56188

Too high price, i need it just for few photos.

my Bvision needs no cooling on the ram even at 100Mhz,above 100Mhz their start to get warm,but this is a on going project & will post when heatsink is needed when temperture is too high.

Yes, CVision ram cooling is not required.
In addition, the radiator is not a solid under the fan:


Most of the air flow goes to the left, through the cooling fins under the video chip, and smaller - down through the holes. that's enough, that would cool the memory, if I overclock it.


So there is no need to grind the base of radiator or underlay plate that would make contact with the memory.

[stachu100]

http://www.fluke.com/fluke/usen/Thermal-Imaging/Fluke-Ti50-Series.htm?PID=56188
 
 
my Bvision needs no cooling on the ram even at 100Mhz,above 100Mhz their start to get warm,but this is a on going project & will post when heatsink is needed when temperture is too high.

@delshay,
Are you really using this particular TIC?

[delshay]

@delshay,
Are you really using this particular TIC?

no

and if i did,im not that stupid enough to advertise it seeing how expensive it is. i was just pointing this out to easy john as something like this will detect all the hot spots on his card.