Can't fit GVP-M Typhoon into A1200. Help.

[NovaCoder]

Do you think it would be ok/possible to sit the card above that white plastic hinge (where you have the glue) instead of at the bottom? I think that should work as that would only make about 2mm difference which should not flex the card too much.

No don't do that it because it would put pressure on the card (never a good thing), just mount it the same way I did it and all will be well with the world.

[bbond007]

Nice, I wish mine could fit like yours. I think the riser for the SIMM card is unnecessarily too tall. Maybe yours is slightly shorter. 1 or 2mm makes a difference.

yeah, the trapdoor fits really closely.

It naturally seemed to bow out slightly now after I trimmed  it. I'm sure that helps.

I'd like a 64mb SIMM, but I'll need to find one that is low-profile.

After you get it up and running, I'd be interested to know if you have any problems running stuff that uses the 68882 FPU. I keep getting guru #8000000D. "Coprocessor Protocol Violation"

[pkupcik]

Here are photos of my setup:

http://kupcik.smugmug.com/photos/894139174_ZNDft-M.jpg

http://kupcik.smugmug.com/photos/894139204_E6KNs-M.jpg

http://kupcik.smugmug.com/photos/894139246_KpXnV-M.jpg

http://kupcik.smugmug.com/photos/894139162_zCHrM-M.jpg

http://kupcik.smugmug.com/photos/894139238_pn8tY-M.jpg