Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Cybervision 64/3D crashing the ami  (Read 1740 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AmidufferTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2005
  • Posts: 1601
    • Show only replies by Amiduffer
    • http://www.geocities.com/laverdiereaf/
Cybervision 64/3D crashing the ami
« on: October 16, 2008, 02:08:40 AM »
Hi all.

I've put a Cybervision 64/3D in the A4000D, and its having some problems.

A4k, AOS 3.9 with both B.B's, max onboard chip and fast RAM, cybergrafx v3.

Looks super, but, by opening any drawers beyond HD0: and HD1:, will crash the system. I can start programs by Shell (wow, look at those ImageFX screens!) with no problems.

By the way, I have both my 1084s and PC monitor hooked up at the same time, and they work in tandem, especially with ImageFX and Imagine3D. Is that anything to worry about?

Thanks.
Logged
Amiga 3000D UP and running! Hear that clicking. 8)
Amiga 3000D & 4000D in storage sadly.
 

Offline davideo

Re: Cybervision 64/3D crashing the ami
« Reply #1 on: October 16, 2008, 08:15:25 AM »
I found that I also had problems with my Cybervison card in my 4000D.

The solution I found was to use the latest Picasso drivers. It worked a treat after that.

Dave G
 8-)
Logged
 

Offline darksun9210

Re: Cybervision 64/3D crashing the ami
« Reply #2 on: October 16, 2008, 11:09:24 AM »
either that or upgrade to CyberGraphix 4, but picasso96 is free, so either or..

i would say what buster revision do you have? but i've not had problems with either 9 or 11 and a CV64/3D...

if you take the card out, are you able to open draws again?
Logged

A500, A600, A1200x3, A2000, A3000, A4000 & a CD32.
and probably just like the rest of you, crates full of related "treasure" for the above XD
 

Offline Darrin

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2002
  • Posts: 4430
    • Show only replies by Darrin
Re: Cybervision 64/3D crashing the ami
« Reply #3 on: October 16, 2008, 12:44:19 PM »
I use CGX4.x in my A4000D.

The only problem I had was the Deneb conflicting with the CV64/3D, but that was fixed by reflashing the Deneb with the latest firmware update.
Logged
A2000, A3000, 2 x A1200T, A1200, A4000Tower & Mediator, CD32, VIC-20, C64, C128, C128D, PET 8032, Minimig & ARM, C-One, FPGA Arcade... and AmigaOne X1000.
 

Offline Lorraine

  • Sr. Member
  • ****
  • Join Date: Sep 2008
  • Posts: 304
    • Show only replies by Lorraine
/
« Reply #4 on: October 16, 2008, 01:05:38 PM »
/
Logged
 

Offline AmidufferTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2005
  • Posts: 1601
    • Show only replies by Amiduffer
    • http://www.geocities.com/laverdiereaf/
Re: Cybervision 64/3D crashing the ami
« Reply #5 on: October 16, 2008, 07:17:18 PM »
Quote

Lorraine wrote:

Same thing happened to me.

Took me a bit to figure this out but CyberGFX 3 doesn't get along with BoingBag 2. The only solution is to upgrade CyberGFX or miss out BB2.


If, by installing P96, will I have to remove the CGFX3 from the HD?

Upgrading to 4 makes sense though.
Logged
Amiga 3000D UP and running! Hear that clicking. 8)
Amiga 3000D & 4000D in storage sadly.
 

Offline AmidufferTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2005
  • Posts: 1601
    • Show only replies by Amiduffer
    • http://www.geocities.com/laverdiereaf/
Re: Cybervision 64/3D crashing the ami
« Reply #6 on: October 16, 2008, 07:19:58 PM »
Quote

darksun9210 wrote:
either that or upgrade to CyberGraphix 4, but picasso96 is free, so either or..

i would say what buster revision do you have? but i've not had problems with either 9 or 11 and a CV64/3D...

if you take the card out, are you able to open draws again?


Buster 11. If I have the screensize in 640 x 480 hires, there's no problems with opening drawers.
Logged
Amiga 3000D UP and running! Hear that clicking. 8)
Amiga 3000D & 4000D in storage sadly.
 

Offline TjLaZer

Re: Cybervision 64/3D crashing the ami
« Reply #7 on: October 16, 2008, 09:57:11 PM »
Just remove the CyberVision monitor driver from devs:monitors and install Picasso96.  Its better and works great with the card.
Logged
Going Bananas over AMIGAs since 1987...

Looking for Fusion Fourty PNG ROMs V3.4?

:flame: :banana: :banana: :banana:
 

Offline Lorraine

  • Sr. Member
  • ****
  • Join Date: Sep 2008
  • Posts: 304
    • Show only replies by Lorraine
/
« Reply #8 on: October 17, 2008, 12:32:29 AM »
/
Logged
 
Pages: [1]   Go Up
« previous next »