Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A500 PSU voltages  (Read 957 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2799
  • Country: 00
    • Show only replies by orange
A500 PSU voltages
« on: September 21, 2008, 02:42:12 PM »
I have two A500 PSUs with suspicious -12V;
One is 'heavy' type and it outputs -15,58V
the other one is 'light' type and it has -9,77V

Both were measured with no load, and both have ok +5 and +12.

Would it be safe to use them with A500?
Logged
“Giving up is always an option, but not always a failure.”
 

Offline redrumloa

  • Original Omega User
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 10126
    • Show only replies by redrumloa
Re: A500 PSU voltages
« Reply #1 on: September 21, 2008, 04:32:18 PM »
I would test them with load, if the values don't come closer to -12V I'd probably not use them myself. The 9.77 is just barely within 20%, but the 15.58 is more than 20%.
Logged
Someone has to state the obvious and that someone is me!
 
Pages: [1]   Go Up
« previous next »