Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Nec FD1231H  (Read 1199 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline JLPedroTopic starter

  • Newbie
  • *
  • Join Date: Nov 2007
  • Posts: 17
    • Show only replies by JLPedro
Nec FD1231H
« on: November 08, 2007, 05:17:03 PM »
 Does any one knows were is the jumper to switch this drive from d1 to d0?
Logged
1 x A500, 1 x A600, 1 x A1200 1230 IV 64MB Indivision AGA 4GB CF Squirell Plextor 40Tsi
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Nec FD1231H
« Reply #1 on: November 09, 2007, 09:49:00 PM »
 Swap pins 12 x 14 in floppy cable or between the header and the floppy board...

 Does do the trick.
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 

Offline JLPedroTopic starter

  • Newbie
  • *
  • Join Date: Nov 2007
  • Posts: 17
    • Show only replies by JLPedro
Re: Nec FD1231H
« Reply #2 on: November 14, 2007, 06:42:29 PM »
Didn't work, swapping the pin 12 to 14. I will try to buy a new drive , maibe a sony mp or a Samsung 321b, they sell those new.
Logged
1 x A500, 1 x A600, 1 x A1200 1230 IV 64MB Indivision AGA 4GB CF Squirell Plextor 40Tsi
 

Offline rkauer

  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 3263
    • Show only replies by rkauer
Re: Nec FD1231H
« Reply #3 on: November 14, 2007, 08:34:39 PM »
 In the worst case, keep it to use as an external drive (DS1). ;-)
Logged
Goodbye people.

I\'ll pop on from time to time, RL is acting up.
 
Pages: [1]   Go Up
« previous next »