Welcome, Guest. Please login or register.

Author Topic: Fastlane Zorro 3  (Read 2230 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline TreadwheelTopic starter

  • Newbie
  • *
  • Join Date: Nov 2003
  • Posts: 46
    • Show only replies by Treadwheel
Fastlane Zorro 3
« on: May 20, 2007, 03:41:13 AM »
Have a Phase 5 Fastlane for sale
on auction at ebay.
Will ship worldwide.

item #130115132108

Thanks

 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3645
    • Show only replies by alexh
    • http://thalion.atari.org
Re: Fastlane Zorro 3
« Reply #1 on: May 20, 2007, 07:18:57 AM »
Wow that is expensive. Roughly 2x what I was expecting.
 

Offline Effy

  • Hero Member
  • *****
  • Join Date: Aug 2002
  • Posts: 2053
    • Show only replies by Effy
Re: Fastlane Zorro 3
« Reply #2 on: May 20, 2007, 10:30:57 AM »
That's the price for a Cyberstorm 040 with scsi controller  :-)

Offline TreadwheelTopic starter

  • Newbie
  • *
  • Join Date: Nov 2003
  • Posts: 46
    • Show only replies by Treadwheel
Re: Fastlane Zorro 3
« Reply #3 on: May 26, 2007, 05:05:38 PM »
Relisted at lower price
New #130118466410.

Can't use it since my A4000T has a Mediator.
Was $599.00 new and saw one go for 400.00.

Have other items on my web page:
http://home.comcast.net/~cevoner/Prodpage.htm
that I'd add in for any Amiga.org member.

Thanks guys
 

Offline countzero

  • Hero Member
  • *****
  • Join Date: Mar 2005
  • Posts: 1938
    • Show only replies by countzero
    • http://blog.coze.org
Re: Fastlane Zorro 3
« Reply #4 on: May 26, 2007, 05:09:54 PM »
I saw one go for 172$ (mine).
I believe in mt. Fuji
 

Offline pVC

Re: Fastlane Zorro 3
« Reply #5 on: May 26, 2007, 05:56:38 PM »
Uh oh.. still 3x what I'd expect ;) Well.. crazy ebayers ;)
Daily MorphOS user and Amiga active.
 

Offline Reflex

  • Full Member
  • ***
  • Join Date: Mar 2005
  • Posts: 127
    • Show only replies by Reflex
Re: Fastlane Zorro 3
« Reply #6 on: May 26, 2007, 09:03:56 PM »
well, I bought mine in 2000 for about 80 euros...

Good luck!

PS: I have a mediator too but I use it... what's wrong with that?
 

Offline TreadwheelTopic starter

  • Newbie
  • *
  • Join Date: Nov 2003
  • Posts: 46
    • Show only replies by Treadwheel
Re: Fastlane Zorro 3
« Reply #7 on: May 26, 2007, 11:01:08 PM »
Also have Subway, Varoi Serial, and a Quikpak 060 with
128 ram in there.

I used the zorro riser but the Fastlane has phase
errors with hard drives. CD drives play music slow.
Either you need memory on the Fastlane or it does not
get along with those items.

I bought it recently so it should run without those products.
Read it had trouble with a Multiface. If you have a opinion
on how it could run it would be helpful.

I would just rather keep the other stuff.
 

Offline Reflex

  • Full Member
  • ***
  • Join Date: Mar 2005
  • Posts: 127
    • Show only replies by Reflex
Re: Fastlane Zorro 3
« Reply #8 on: May 27, 2007, 11:53:03 AM »
I have some problems with memory managing, it seems that come capacitors are not OK anymore, I think I'll send it to Jean Jacque boulet in order to check it and eventually repair, but there are no conflicts with oter hardware and I have:

Towered Amiga 4000D with rom 3.1
CSPPC 060 and 200 MHZ PPC

Delfina Lite
Picasso IV

Mediator with:
1) Voodoo 3
2) RTL 8139D Ethernet board
3) Spider II USB

And the fastlane of course ;)

Im planning to buy a TV card too :P

Ah I upgraded the firmware to 8.5 version (z3scsi.device)
did you try it?
 

Offline TreadwheelTopic starter

  • Newbie
  • *
  • Join Date: Nov 2003
  • Posts: 46
    • Show only replies by Treadwheel
Re: Fastlane Zorro 3
« Reply #9 on: May 27, 2007, 01:39:57 PM »
I have the A4000T which needs the riser card
to go above the Mediator stuff. I think
that is why the sync seems touchy.
It recognizes the Fastlane but its' only barely accessible.
My Mediator has:
1)Voodoo 3
2)Dlink Ethernet
3)Soundblaster

The Vario uses the Subway for USB which works great.
Thats my only zorro card which I do not wish to give up
for the Fastlane.

Also I use the 4000T's scsi for Harddrive/CD.
That may be a Fastlane quirk. I don't know the
z3scsi version but I can check.

If it doesn't sell I'd try without the Vario to see
if that works. I don't think I can disable the 4000T's scsi.
I'd be willing to trade for the DKB half card memory if
I can find one. Adding memory to the Fastlane may help too.

Thanks for the info.