GFX Cards and Elbox Mediator

[bubba]

I'm considering buying a mediator for my 1200 tower project.  It's not clear what additional software I might need.  Does the Mediator come with RTG software like CyberGFX?  

Also, what is the minimum type of accelerator I should be using with the mediator.   I have a Blizzard IV 030@50mhz with 16MB.  Is this going to work or do I need something more powerful?

Thx,
Bubba

[McVenco]

To use the Mediator an accelerator isn't really required, but if you want to add some hardware like a GFX-card or networkcard, a little extra speed might come in handy.

Your Blizzard will do just fine, but if you want raw speed you can always look for a 68060 card (or a BlizzardPPC) of course.

[motorollin]

All the software you need comes with the Mediator. The Mediator is compatible with 030, 040 or 060, but I would recommend at least an 040 to get the best out of it.

--
moto

[Amigaz]

The Mediator uses the Picasso96 RTG system which isn't included...Elbox only provides some hacked P96 drivers

[motorollin]

Oh yeah oops. If you've got OS3.9 then you've already got P96.

--
moto

[rkauer]

The OFFICIAL hardware requirements are:

 Amiga 1200 in tower case with a 4MB RAM expansion card.

 The recommended configuration is: Amiga 1200 in the E/BOX tower case, any 68060 (or PPC with 68060) turbo card with 64MB RAM, a SharkPPC G3/G4 card with 256MB SDRAM, a Voodoo4 graphic card.

[rkauer]

Note there is NO NEED to have any kind of acelerator in the Amiga, only 4 Mb Fast RAM.

[cv643d]

I am also interested in the Mediator for my A1200T.

Can you run any resolution on the Voodoo3 in WB? I see it supports up to 2046*1536 at 75Hz. But could you run 32bit 1920x1200 or 32 bit 1600x1200?

Do you think I can hack a cable together and use my Eyetech Bmon with the Voodoo card?