Well trying to get my 3000T running again it seems the CPU slot does not work. I had a CSMK2 in it and system would not boot, I tore it apart to reseat the card (had to do that a few times in the past to get it to boot) This time it does not work. If I remove the card it boots to the onboard 030 fine. I suspected the MK2 was defective, so I installed it in a 4000 today and it works fine. I tried to clean the cpu slot with sand paper in slit and no go. Anything else I can do? I tried to see if my A3640 would work but it seems I am missing a chip: 74F08N. Gonna order it and see if I can get that 040 working in it...