Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: 3.1 ROM in an A500 rev.6a  (Read 2190 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ehallTopic starter

  • Newbie
  • *
  • Join Date: Jul 2006
  • Posts: 2
    • Show only replies by ehall
3.1 ROM in an A500 rev.6a
« on: July 15, 2006, 12:39:24 AM »
hello im a total newb to amiga hardware and have just been messing around with some stuff ive found here and there.
anyway ive got an a500 rev.6a mobo that ive enabled 1mb agnus on by cutting the jp7a tracks and the botom and middle jp2 pads and conecting the top and middle jp2 pads.
i then soddered in 4 100ns 44256 4-bit x 256K chips.
then i atempted to replace the 1.3 rom that was there with a 3.1 rom chip i found when i booted up the first time i got the insert 3.1 workbench disk screen i then shut down and tryed to reboot with the disk in the drive now every boot up results in no video and a bliking keyboard code. if i replace the 1.3 rom boots up normaly. is there any special pin out configuration i need or any advice out there?    
Logged
 

Offline pierre

  • Sr. Member
  • ****
  • Join Date: Jul 2006
  • Posts: 375
    • Show only replies by pierre
Re: 3.1 ROM in an A500 rev.6a
« Reply #1 on: July 15, 2006, 01:42:07 AM »
well first of you are bold "newb"!  to get the sogdering gun out like that!   The first question I have what 3.1 roms are you using? You need ones that are for the 1200 (not 4000d or t).   What kind of code?  any more info, if it blinking it means it resetting itself... anywhay others here know more than I!  YOu can to the right place..

Logged
 

Offline pierre

  • Sr. Member
  • ****
  • Join Date: Jul 2006
  • Posts: 375
    • Show only replies by pierre
Re: 3.1 ROM in an A500 rev.6a
« Reply #2 on: July 15, 2006, 01:42:17 AM »
well first of you are bold "newb"!  to get the sogdering gun out like that!   The first question I have what 3.1 roms are you using? You need ones that are for the 1200 (not 4000d or t).   What kind of code?  any more info, if it blinking it means it resetting itself... anywhay others here know more than I!  YOu can to the right place..

Logged
 

Offline mr_a500

  • Hero Member
  • *****
  • Join Date: May 2004
  • Posts: 865
    • Show only replies by mr_a500
Re: 3.1 ROM in an A500 rev.6a
« Reply #3 on: July 15, 2006, 03:48:14 AM »
Quote
...The first question I have what 3.1 roms are you using? You need ones that are for the 1200 (not 4000d or t)....


What? No you don't. You need the 3.1 ROM for the A500/A2000.

Since you have a revision 6A, the A500 3.1 ROM should just plug in fine with no modifications (rev. 3 & rev. 5 require some soldering).

Are you using an original WB 3.1 disk? Maybe it has already been configured with an improper display mode or monitor.
Logged
 

Offline doctorq

  • Hero Member
  • *****
  • Join Date: Aug 2003
  • Posts: 2082
    • Show only replies by doctorq
Re: 3.1 ROM in an A500 rev.6a
« Reply #4 on: July 15, 2006, 08:12:04 AM »
@pierre

As a follow up on what mr_a500 said; how would you imagine to install two chips in one socket???
Logged
 

Offline SamOS39

  • Sr. Member
  • ****
  • Join Date: Aug 2005
  • Posts: 357
    • Show only replies by SamOS39
    • http://amigaknight.tk
Re: 3.1 ROM in an A500 rev.6a
« Reply #5 on: July 15, 2006, 09:23:13 AM »
This is what you need to get.

Here ....
Logged
 

Offline pierre

  • Sr. Member
  • ****
  • Join Date: Jul 2006
  • Posts: 375
    • Show only replies by pierre
Re: 3.1 ROM in an A500 rev.6a
« Reply #6 on: July 17, 2006, 05:40:11 PM »
just so you guys don;t think I'm nuts, I thought he said he had a 1200, yes for an A500 A500 roms please, sorry for miscomunication!  I am wrong..

Pierre
Logged
 

Offline Chain

  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1324
    • Show only replies by Chain
    • http://chain.3dgrafika.cz/aktivity
Re: 3.1 ROM in an A500 rev.6a
« Reply #7 on: July 17, 2006, 08:14:56 PM »
From what disk u are trying to boot?

(maybe someFFSxOFS issues, just guessing)
Logged
too lazy to use shift key properly...
 

Offline Amiga4k

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 300
    • Show only replies by Amiga4k
Re: 3.1 ROM in an A500 rev.6a
« Reply #8 on: July 20, 2006, 06:08:58 AM »
mr a500,
Excellent and concise answers. Dunce caps to some others.

ehall,
(1) Leave out the 3.1 disk. Report back. Try the Install disk. (Just a test for video). Try the 1.3 disk. Report back.
(2)I would like the number on this ROM.
(3)Is the monitor a standard 15Khz monitor?
(4)What exactly do you mean by no video? What screen color?
(5)How many blinks on the keyboard.
Logged
Won\'t hide my location.
"I know if you have been good or bad!"
 
Pages: [1]   Go Up
« previous next »