Welcome, Guest. Please login or register.

Author Topic: Hard Drive connected what next?  (Read 1594 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline RobinGoddTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 40
    • Show only replies by RobinGodd
    • http://robismad.piczo.com
Hard Drive connected what next?
« on: March 04, 2006, 11:55:52 AM »
I have connected my hard drive and can hear it. But the screen stays black and then after a short while it boots with the kickstart screen. I have tried useing hdtools to detect and install it but it cant find it.
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: Hard Drive connected what next?
« Reply #1 on: March 04, 2006, 12:16:22 PM »
What kind of Amiga, what interface, what harddisk, what other peripherals do you have connected.

Offline RobinGoddTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 40
    • Show only replies by RobinGodd
    • http://robismad.piczo.com
Re: Hard Drive connected what next?
« Reply #2 on: March 04, 2006, 12:17:39 PM »
Its a 351mb hd, and im trying to set it up on a standard amiga 1200.
 

Offline amigakit

Re: Hard Drive connected what next?
« Reply #3 on: March 04, 2006, 12:26:36 PM »
Does it show up in the Early Startup Menu (hold both mouse buttons when reseting the Amiga)

Does it have any drive selection jumpers on it- these usually need to be removed.

Also did you make the drive bootable in HDToolbox?
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline RobinGoddTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 40
    • Show only replies by RobinGodd
    • http://robismad.piczo.com
Re: Hard Drive connected what next?
« Reply #4 on: March 04, 2006, 12:34:53 PM »
The drives that show up in the Early Startup menu are the following:

DF0:
CC0:

I have no jumer settings on it and HDTools didn't detect it.
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: Hard Drive connected what next?
« Reply #5 on: March 04, 2006, 12:38:54 PM »
Hm, sounds like a master/slave jumper set wrong (Are you really sure there aren't any jumpers on the HD? If it's a 2,5" the jumpers can be rather tiny). Is there any table printed on the HD saying stuff like MA/SL/CS, also is it a 3,5" or 2,5"? You can boot to WB from floppy I understand?

Offline amigakit

Re: Hard Drive connected what next?
« Reply #6 on: March 04, 2006, 12:40:26 PM »
If HDToolbox did not recognise the drive, that means either the drive is defective or you need a replacement 2.5" drive cable or the cable isn't properly fixed in.

Check that the drive cable is firmly in place on the motherboard and the drive is firmly connected.  Ensure that the drive connector isn't displaced over the pins.
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline RobinGoddTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 40
    • Show only replies by RobinGodd
    • http://robismad.piczo.com
Re: Hard Drive connected what next?
« Reply #7 on: March 04, 2006, 12:57:14 PM »
There are no jumpers and its a 2.5 drive. I have also checked the ide cable and it is connected properly.
 

Offline amigakit

Re: Hard Drive connected what next?
« Reply #8 on: March 04, 2006, 01:17:07 PM »
It is probably defective then.

Another possibility is that it could be slow to startup-some old drives startup slower than the Amiga's IDE interface takes to recognise them.  This problem was fixed with Kickstart 3.1

Have you tried doing a warm reset and then testing it?  You can also cut pin 1 on the IDE cable to compensate for slow drives.
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline RobinGoddTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 40
    • Show only replies by RobinGodd
    • http://robismad.piczo.com
Re: Hard Drive connected what next?
« Reply #9 on: March 04, 2006, 01:23:54 PM »
I got it working! Do you know the ide cabe was upside down. :lol:
Thanks everyone for your help. :-)
Amiga.org is great!
 

Offline Amigaz

  • Hero Member
  • *****
  • Join Date: Feb 2004
  • Posts: 1959
  • Country: se
  • Gender: Male
    • Show only replies by Amigaz
Re: Hard Drive connected what next?
« Reply #10 on: March 04, 2006, 01:31:12 PM »
lol, sounds like my first experience with connecting a harddrive to an Amiga (A1200)
It´s amazing to see how much punishment an Amiga can take without anything saying poof :D
-------------------------------------------------------------------
Amiga 4000T - A3640 '040
Amiga 4000 - CS MKIII
Amiga 1200 - Blizzard 1230 MKIV
Amiga 1200 - Stock
Amiga CD32 - TF360
A bunch of ol' A500's