Welcome, Guest. Please login or register.

Author Topic: Amiga 500 With 590 Issues  (Read 2064 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiga1084Topic starter

  • Full Member
  • ***
  • Join Date: Jul 2005
  • Posts: 214
    • Show only replies by amiga1084
Amiga 500 With 590 Issues
« on: December 15, 2005, 05:46:11 AM »
Hello All,

I am Amiga 4000T and A3000T user, I was given an A500
with with 590 XT 20Meg hard drive.I was woundering
if the 590 is the same as 2091 hard scsi card for A2000 and
if so could I put nice 500Meg to 1Gig Scsi Hard Drive in it.Thanks for your help Merv  :-)
 

Offline Argus

  • Hero Member
  • *****
  • Join Date: Jul 2004
  • Posts: 942
    • Show only replies by Argus
Re: Amiga 500 With 590 Issues
« Reply #1 on: December 15, 2005, 09:45:16 AM »
afaik, it is the same card, can take 2mb of 16-bit dma memory like the a2091, has the dmac and WD scsi chips.  The only difference, other than the form factor, it the A590 has the 8-bit XT implemented on the board whereas on the A2091 there are just solder holes where the XT header should be.
posted on A2500+ C=2620 14MHz/8MbFast/1MbChip
dialed in @34K
Just livin\\\' the dream...
 

Offline toca180

  • Full Member
  • ***
  • Join Date: May 2005
  • Posts: 113
    • Show only replies by toca180
Re: Amiga 500 With 590 Issues
« Reply #2 on: December 15, 2005, 11:38:36 AM »
Hi

You sure can put a 50 pin SCSI disk in there. I have a 2 GB drive in mine (see sig) and it works fine. I think there is a jumper somewhere to change for SCSI. Can anyone confirm this? (I dont have my amiga with me.  :-(  )

Robert
A1200 (Dead :-(  OS 3.1/3.1, 030@33, 882@33, 2/8MB RAM, 1.4GB HDD
A500 OS 3.1/3.1, 020@14, 882@14, 0.5/6.5MB RAM, A590 2GB SCSI HDD, CD ROM, Mas Player
A600 OS 2.1/2.05, 000@7, 1/0MB RAM

Commodore
Vic 20 1530
64C 1541, 1530
128 1530
C16 1531
 

Offline Tahoe

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 971
    • Show only replies by Tahoe
    • http://www.amiga4ever.nl
Re: Amiga 500 With 590 Issues
« Reply #3 on: December 15, 2005, 11:43:39 AM »
The jumper (XT/SCSI) is actually only for the activity LED  :-D

About using large(r) drives in the A590 it depends (just like with the A2091) on the EPROM version (7.0 recommended) and the version of the WD SCSI chip.

Sometimes drives appear to work, but as soon as you partition the upper part of the disk it will overwrite previous partitions!! So always do a full format on all your partitions, reboot and check if they are still there!
Greetings from Wilnis, The Netherlands
Now owning ALL Amiga models and most; if not all; flavours of them...My Amiga Museum
 

Offline toca180

  • Full Member
  • ***
  • Join Date: May 2005
  • Posts: 113
    • Show only replies by toca180
Re: Amiga 500 With 590 Issues
« Reply #4 on: December 15, 2005, 11:49:33 AM »
Quote

Tahoe wrote:
The jumper (XT/SCSI) is actually only for the activity LED  :-D


Important then!!!  :-D

Thanks
Robert
A1200 (Dead :-(  OS 3.1/3.1, 030@33, 882@33, 2/8MB RAM, 1.4GB HDD
A500 OS 3.1/3.1, 020@14, 882@14, 0.5/6.5MB RAM, A590 2GB SCSI HDD, CD ROM, Mas Player
A600 OS 2.1/2.05, 000@7, 1/0MB RAM

Commodore
Vic 20 1530
64C 1541, 1530
128 1530
C16 1531