Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: FPU usage without crystal!  (Read 1369 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline r6stuTopic starter

  • Full Member
  • ***
  • Join Date: Jul 2005
  • Posts: 117
    • Show only replies by r6stu
    • http://www.a1200.sksoftware.co.uk
FPU usage without crystal!
« on: October 09, 2005, 11:58:08 AM »
I got a ram card with an FPU from ebid. However it dosent have an FPU crystal with it!!

Is it safe to use without a crystal or should I take the FPU out??


What crystal do I need?? On the FPU it says

xc68882rc33a
2b74s
dea08901
Logged
1x A1200,Apollo 1230/50 16mb,6gig hdd,os3.9 zappoCD
1x A600, 2mg, 170mb hdd, OS2
1x A1500, 5mb, 500mb, OS3.1
1x A1200 SPARES
1x A500+
 

Offline Framiga

  • Hero Member
  • *****
  • Join Date: May 2003
  • Posts: 4096
    • Show only replies by Framiga
Re: FPU usage without crystal!
« Reply #1 on: October 09, 2005, 12:21:27 PM »
the FPU uses (in your case) the same cristal that the main CPU uses.

Anyway is possible to use a separate (and higher) cristal for the FPU, configurable usually through a jumper.

btw . . . the FPU its a 68882 at 33 Mhz

Which brand/model the RAM expansion is?

Logged
 

Offline r6stuTopic starter

  • Full Member
  • ***
  • Join Date: Jul 2005
  • Posts: 117
    • Show only replies by r6stu
    • http://www.a1200.sksoftware.co.uk
Re: FPU usage without crystal!
« Reply #2 on: October 09, 2005, 04:44:28 PM »
The Card is a Microbotics MBX 1200z.
Logged
1x A1200,Apollo 1230/50 16mb,6gig hdd,os3.9 zappoCD
1x A600, 2mg, 170mb hdd, OS2
1x A1500, 5mb, 500mb, OS3.1
1x A1200 SPARES
1x A500+
 
Pages: [1]   Go Up
« previous next »