Welcome, Guest. Please login or register.

Author Topic: Power supply  (Read 1561 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline qwertyTopic starter

  • Newbie
  • *
  • Join Date: Sep 2005
  • Posts: 2
    • Show only replies by qwerty
Power supply
« on: September 28, 2005, 06:47:15 PM »
I'm thinking of getting a Blizzard 1230 IV for my Amiga 1200, but not sure how much power that would require. It has the 030 at 50mhz and the 882 fpu at 50mzh. Do i need more power than the original power supply, or will it work just fine with that?

I've also got a hd and a pcmcia network card connected.
 

Offline X-ray

  • Hero Member
  • *****
  • Join Date: Jul 2004
  • Posts: 4370
    • Show only replies by X-ray
Re: Power supply
« Reply #1 on: September 28, 2005, 07:30:42 PM »
Back in the day, I ran my A1200 with a 50mHz 030 and 68882, HD and Squirrel SCSI on the standard PSU. You should be fine with your setup.
 

Offline 68020

  • Newbie
  • *
  • Join Date: Sep 2005
  • Posts: 10
    • Show only replies by 68020
Re: Power supply
« Reply #2 on: September 28, 2005, 08:08:24 PM »
I also had Blizzard 1260, 3.5 HD mounted in the case, Ext. HD floppy,  Surf Squirrel and 100meg Zip attached to the Squirrels SCSI.. All of which i will be auctioning off on Ebay.ca when I have time.

You shouldn't have any problems qwerty.

Regards,
Nam
 

Offline SamuraiCrow

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2281
  • Country: us
  • Gender: Male
    • Show only replies by SamuraiCrow
Re: Power supply
« Reply #3 on: September 28, 2005, 08:47:12 PM »
You could always scratch around and find an A500 power supply cheap.  The smallest A500 PS was 35W while the A1200 comes with a 25W supply.
 

Offline qwertyTopic starter

  • Newbie
  • *
  • Join Date: Sep 2005
  • Posts: 2
    • Show only replies by qwerty
Re: Power supply
« Reply #4 on: September 29, 2005, 03:29:42 AM »
Ok, cool!

What about a PPC board? Can you run one of those successfully without extra power?