Welcome, Guest. Please login or register.

Author Topic: PAL on an NTSC Monitor  (Read 1581 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 214
  • Country: us
  • Gender: Male
    • Show only replies by bradhansen1
PAL on an NTSC Monitor
« on: February 10, 2023, 10:55:30 PM »
Hi All, Most of my games and demos are displayed on PAL screens. My NEC Accusync can display
PAL screens but not in the correct configuration. The Bottom is cut off. Even if I start my Amiga
in PAL and I am using a PAL display mode which gives me a full view. Whenever I start a game or demo
the screen always reverts to a too long to display PAL image. Is there some fix I can use to get them
to display correctly? Or do I just need to switch to a PAL Monitor?
Thanks for any help you can give me.
Brad Hansen
« Last Edit: February 10, 2023, 11:00:08 PM by bradhansen1 »
 

Offline Matt_H

Re: PAL on an NTSC Monitor
« Reply #1 on: February 11, 2023, 10:18:37 PM »
You may have to play with the monitor settings once you're in a PAL screenmode. LCDs are a lot less flexible than good ol' CRTs. When used with Amigas, often the LCDs can't detect when a screenmode has changed, or it will autodetect the wrong mode. Either way, the display will be off. Sometimes forcing an auto-adjust on the monitor will clear it up, other times you may need to manually adjust the display settings (position, size, etc.). YMMV, depending on the particular monitor and/or scandoubler you're using.
 

Online RobertB

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Jun 2005
  • Posts: 1900
  • Thanked: 25 times
    • Show only replies by RobertB
    • http://www.dickestel.com/fcug.htm
Re: PAL on an NTSC Monitor
« Reply #2 on: February 16, 2023, 10:12:59 AM »
Even if I start my Amiga in PAL and I am using a PAL display mode which gives me a full view. Whenever I start a game or demo the screen always reverts to a too long to display PAL image. Is there some fix I can use to get them to display correctly? Or do I just need to switch to a PAL Monitor?
Your monitor is not auto-adjusting to the Amiga's screenmodes.  With the use of a RGB-to-VGA adapter, the Dell U2410 multiscan monitor will auto-adjust to most, if not all, Amiga screenmodes.  Price of a U2410 - $100 or under.

Proud owner of four U2410's,
Robert Bernardo
Fresno Commodore User Group - http://www.dickestel.com/fcug.htm
Southern California Commodore & Amiga Network - http://www.portcommodore.com/sccan
April 15-16 Commodore Los Angeles Super Show - http://www.portcommodore.com/class