NetSurf 3.2 68k released

[utri007]

Is your screen depth 16-bit or higher?

I prety sure that it is 16bit. Need to check it for sure tomorrow. There is slight change that it is 15bit.

[apj]

Not work for me. After double click on icon, attempt load (you can see on memory display), but few seconds later, stop, and not load nothing and the memory are clean again.

Can you download again. I've updated binary.

If not, does any of this 4 binaries works for you?:
WIP.7z

[utri007]

Is your screen depth 16-bit or higher?

Screen depth is 16bit and I need to set friend_bitmap manually.

Noticed that effect without friend_bitmap, is same than color problems with AGA. Is it possible, that problems with AGA are related?

[chris]

Screen depth is 16bit and I need to set friend_bitmap manually.

Hmm, I'll double-check in case I've missed an '=', but being at least 16-bit is *only* criteria for it being set automatically.

If you run with -v, what does the "screen depth =" line say?

Noticed that effect without friend_bitmap, is same than color problems with AGA. Is it possible, that problems with AGA are related?

Possibly, but guigfx knows what screen it's mapping for, so I find it unlikely.  You can try friend_bitmap on AGA screens of course.  It looks like an endian issue, but I've tried a myriad of different byte orders for the images and none of them are right.  What I haven't tried is blotching out individual channels to try and work out what order they're supposed to be in.  Maybe I'll give that a go when I have some time.

[x303]

Can you download again. I've updated binary.

If not, does any of this 4 binaries works for you?:
WIP.7z

Had that same problem too under winuae. Looked like a ixemul crash (ixemul did show a crash window with JIT off).

But,,,,, all of the above work now.

[utri007]

Hmm, I'll double-check in case I've missed an '=', but being at least 16-bit is *only* criteria for it being set automatically.

If you run with -v, what does the "screen depth =" line say?

(2.516862) frontends/amiga/plotters.c:107 ami_init_layers: Screen depth = 16

Tested again, it doesn't work automatically, I need to set friend_bitmap:1 manually. If friend_bitmap should be ON automatically with 16bit screens and better, could you set minium for 15bit? It is theoretically possible color depth with real amigas.

I also tested it with AGA and it doesn't do anything noticeabble to "red effect".

Seems that AGA problem is mostly with jpg pictures, like amiga.org banner. Amigaworld.net banner displays about right, it is gif picture.

[chris]

(2.516862) frontends/amiga/plotters.c:107 ami_init_layers: Screen depth = 16

Tested again, it doesn't work automatically, I need to set friend_bitmap:1 manually. If friend_bitmap should be ON automatically with 16bit screens and better, could you set minium for 15bit? It is theoretically possible color depth with real amigas.

Yes, no problem.

[Xebec]

NetSurf 3.6 Dev released
http://ami-soft.blogspot.com/

Hi APJ!  i just wanted to say I was finally able to get 3.5 working on my Amiga 1200 / with no FPU.  The trick was installing BetterWB on top of Amiga OS 3.1, and that apparently added a few things that Netsurf required.  I am able to open the netsurf-aga-nofpu and see the browser now.

Config:
A1200, Kickstart 3.1
68020 @ 28 mhz, No FPU
2MB Chip, 1MB Slow, 32MB Fast.

I was able to get rid of all of the errors produced by Snoop but it still didn't open or load until I installed BetterWB.  

Thanks for producing this!

Now I have to get DNS resolution working on my MiamiDX miggy..

[Xebec]

Config:
A1200, Kickstart 3.1
68020 @ 28 mhz, No FPU
2MB Chip, 1MB Slow, 32MB Fast.

For the record:

http://www.google.co.uk  - 15.1 seconds to render
http://www.amiga.org -- 141 seconds to render

.

[Niding]

Updated version 4th Desember 2016

Direct download:

http://netsurf.baderman.net/NetSurf-nofpu.4Dec

ami-soft.blogspot.com

Update 4.12.2016
    * fixed youtube conversion
    * updated AGA version
    * updated sources
    * drop ixemul build
    * updated libs:  libcurl 7.51; libssl 1.0.1u