68060.library : OS3.9 46.15 dated 2001 -or- Phase5 46.7 dated 1999

[buzz]

I use the thor ones with my csppc. They seem to work fine for me. They use the mmu.library instead of manually setting up the mmu etc, and also they allow for vmm (like with memory.library - although you would need to write your app to support this). You may need to run p5integrate also (Supplies undocumented p5 calls for mmulib 68040/060 libraries)

[quenthal]

As I'm also using CSPPC, I'm not sure if p5integrate is required, I thought it was for BPPC?

Do you think there is any difference regarding performance/compatability (other than MMULib "compliancy"?)

[Acill]

I am using the top archive from the http://phase5.a1k.org/index.php?driverslibraries site. Are the Thor ones a better option? i wouldnt mind having better MMU support. I haent installed any mmu.library or anythign else other than the WarpUP package on the 3.9 CD and the Warp3D stuff from the Elbox MMCD.

[nicholas]

These are the latest Phase5 060 libs.

http://aminet.net/package/driver/other/040_060Libs

[guest11527]

I am using the top archive from the http://phase5.a1k.org/index.php?driverslibraries site. Are the Thor ones a better option?

It's the only option if you look for actively supported software. Phase5 is bankrupt since a long time, they will no longer update or bugfix anything.

[Acill]

It's the only option if you look for actively supported software. Phase5 is bankrupt since a long time, they will no longer update or bugfix anything.

Is there a single archive to install his libs? If not can you help with a list of what to get for a CSPPC? For some reason I thought only the Phase5 ones worked properly all these years on these boards.

[Rotzloeffel]

Is there a single archive to install his libs? If not can you help with a list of what to get for a CSPPC? For some reason I thought only the Phase5 ones worked properly all these years on these boards.

of course: http://aminet.net/package/util/libs/MMULib

Read the Documentation CAREFULLY! If you use a CybervisionPPC Gfx-card, you need some special advice! the Monitor-file must be edited with a HEX-Editor. There are two entries in the Monitorfile calling the 68060.library. This entries must be changed from 68060.library to p5emu.library