Hi, I just got hold of a couple of A4000D motherboards, all with battery and audio caps leaked. Now I need to try to make at least one of them complete and usable. I need the original casing for A4000D, preferably with all misc in it (no need for floppy or CDR) and with or without a working PSU or no PSU at all. Also I need the Zorro back plane. Already got hold of a A3640 and some SIMMs from ebay which I hope will work.
I am buying rather than swapping though here is what I have up for swap depending on the quality of the case etc:
- Fully working A2000 rev 6.3, complete with case but PSU needs to be changed (PAL).
- Fully working A500 rev 6A, with 1 MB FAST soldered, complete with PSU and RF-modulator (PAL).
- ACARD AEC-7720U (
http://www.acard.com/english/fb01-pr..._idno=6&ino=43)
- GVP A4000-HC+8 SERIES II REV II (with up to 8 MB populated) (
http://amiga.resource.cx/exp/gvp4008 and
http://amiga.resource.cx/exp/impact2000hc8)
- Micro Botics 8-Up! (SIMM version) (with up to 8 MB populated) (
http://amiga.resource.cx/exp/8up)
- Individual Computers Catweasel Z-II (
http://amiga.resource.cx/exp/catweaselz2)
- Faulty A3000 rev 9.03 with daughterboard 7.01 (green blinking screen), complete with case and PSU (PAL).
- Faulty A4000D rev B motherboard (audio circuit probably fried)
- Sets of ZIP-RAM for Amiga 1Mx4 Static or Page Mode ones available.
- Lots of chipsets for A3000/A4000 (Agnus/Buster/Ramsey/Gary/DMAC/WD33C93A/Kickstarts 1.4,3.0,3.1/A4K U103/A4K U198/RICOH RP5C01 and even more for A3000)
- Kickstart switches for A500/A2000/A600, cables (floppy and SCSI), floppydrives for A500/A2000/A3000/A4000 (original and not original ones), mouses, RAM expansions for A500, SupraDrive 500XP (w/out HDD) (with up to 4 MB populated
